PTO & HYDRAULICS

• 

  ADVANCED HYDRAULICS AND MASSIVE LIFT CAPACITY

  The Closed Centre, load sensing CCLS hydraulic system has been engineered by New Holland so it operates at peak efficiency at all times. When the demand upon the system is low, the main hydraulic pump consumes minimal power. When instant hydraulic flow is required, the variable displacement pump option can deliver its maximum capacity of 120 litres per minute in an instant.

• 

  HEADLAND TURN SEQUENCING

  The way in which New Holland has designed its Headland Turn Sequencing, HTS, system makes it extremely simple to set up and use. During a headland turn, the operator initially carries out the turn sequences manually, engaging the HTS record programme. Once the sequence of actions has been recorded by HTS, it can then be used to repeat them by pressing a single button on the CommandGrip™ handle. Once a recording has been made for an implement, it can be saved and stored in the IntelliView™ III monitor.

• 

  ADJUST THE FLOW ON UP TO NINE REMOTES

  The hydraulic remote valves each have individual flow control. Flow and timing to each valve can be individually adjusted using simple ‘pop-up’ menus in the IntelliView™ III touch-screen. Up to five rear and four front valves are available.

• 

  STRONG, EFFICIENT AND POWERFUL

  Rated up to a massive 10463kg, the rear linkage is designed to work with heavy mounted equipment over extended periods. The system incorporates integral dynamic ride control shock load protection. This will reduce bounce when travelling with a heavy mounted implement at transport speeds.

• 

  ELECTRONIC PTO SELECTION

  PTO speed selection is made easily and quickly by using the electronic rotary switch. For economy, PTO speeds are achieved at a reduced engine speed.

• 

  AUTO PTO OPERATION

  Auto PTO can be selected to automatically disengage the PTO as the rear linkage is raised above a pre-set point. This protects the PTO shaft and tractor. The system will also re-engage drive as the linkage is lowered.