CR – Tier 4A

GRAIN HEADERS

  • LEADING FROM THE FRONT

    New Holland knows that the harvesting process starts with the crop. How it enters the machine will determine the quality of the harvest, therefore, a vast range of grain headers to suit every type of crop and farm have been developed and built in-house to suit your needs. Headers are available in widths ranging from 6 - 12.5 metres and in a wide range of configurations that can be tailored to match your requirements.


    Grain headers CR8070 CR8080 CR9070 CR9080 CR9090
    High-Capacity grain header cutting width (m) 6.10 - 9.15 6.10 - 9.15 7.31 - 9.15 7.31 - 9.15 7.31 - 9.15
    Varifeed™ grain header cutting width (m) 6.10 - 9.15 6.10 - 10.67

    7.62 - 10.67

    7.62 - 10.67

    7.62 - 10.67

    SuperFlex headers cutting width (m) 6.10 - 10.67 6.10 - 10.67

    6.10 - 12.5

    6.10 - 12.5

    6.10 - 12.5

  • SUPER-SIZED HEADER PERFORMANCE: 12.5 METRE VARIFEED™ HEADER

    In order to deliver ultimate harvesting efficiency in today’s largest fields, the 12.5 metre Varifeed™ header will become the default choice. Ideal for operations which utilise controlled traffic, the header’s construction guarantees strength and durability, whilst the split auger manages large volumes of crop with ease. The dual-knife drives, located at either end of the header, maintain powerful cutting across the full cutterbar width, as well as delivering perfect weight distribution to assist with uniform stubble height.
  • VARIFEED™ GRAIN HEADERS: ADAPT TO ALL TYPES OF CROP

    In order to guarantee optimum harvesting quality and a uniform cut in fields of different crop heights, the Varifeed™ header is your perfect partner. The knives can be adjusted by a full 575mm in their fore-aft position for ideal feeding. The 660mm diameter auger with deep flights provides fast, smooth feeding even in the heaviest crops. Full-width retracting fingers, between each auger flight, move crop down and under the auger, and can be electro-hydraulically adjusted in all directions from the cab for smooth, continuous feeding. These headers are available in 7.32 - 12.5 metres.
  • FLEXIBILITY FOR GUARANTEED HARVESTING EFFICIENCY

    In undulating terrain, the SuperFlex Header is the default choice. The flexible knife bed can flex a full 110mm in uneven fields to ensure a close cut and uniform stubble height. The full-floating auger with deep flights provides fast, smooth feeding even in the heaviest crops. When combined with 1150 cuts per minute and the cab-based hydraulic fore and aft reel adjustment, precise feeding and processing are a given. You can even maintain a pre-set ratio between reel speed and ground speed, so that when ground speed changes consistent feeding is guaranteed.
  • AUTOMATIC HEADER HEIGHT CONTROL

    The advanced Automatic Header Height Control system has three operational modes:
    • Compensation Mode uses a pre-established ground contact pressure that is hydraulically maintained to ensure efficient harvesting of laying or low growing crops such as peas and beans.
    • Automatic Stubble Height Control maintains a pre-set stubble height by using sensors located on the underside of the header together with the hydraulic header control cylinders.
    • The AutoFloat™ system uses a combination of sensors that ensure the header follows uneven terrain and automatically adjusts its position hydraulically to maintain uniform stubble height and to prevent the header digging into the ground.