Engine | | Caterpillar C18 |
Engine configuration and number of cylinders | | In-line 6 |
Capacity (cm³) | | 18100 |
Injection system | | Unit injectors |
Compliant with engine emissions regulations | | Tier 3 |
ECOBlue™ SCR system (Selective Catalytic Reduction) | | - |
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV] | | 470 / 639 |
Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV] | | 504 / 685 |
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm) | | 2160 |
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm) | | 2698 |
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm) | | 2957 |
Torque rise (2100 to 1500rpm) (%) | | 37 |
Torque rise (2100 to 1800rpm) (%) | | 25 |
Approved biodiesel blend** | | B20 |
Power Cruise™ II system | |  |
Fuel consumption measuring and read-out on IntelliView™ IV monitor | | |
Air compressor | | |
Diesel capacity (l) | | 1220 |
AdBlue capacity (l) | | - |
Feeding | | HydroLoc™ drive |
Length of cut adjustment | | Infinite |
Number of feed-rolls (n°) | | 4 |
Feed opening width (mm) | | 860 mm (33.86 inch) |
MetaLoc™ metal detection with position indication | | |
Dual Drive system (header hydrostatic drive) | |  |
Cutterhead cylinder type | | V-shaped with 2 rows of knives |
Cutterhead frame width (mm) | | 900 mm |
Cutterhead cylinder width (mm) | | 884 mm |
Cutterhead diameter (max / min) (mm) | | 710 mm / 690 mm |
Cutterhead speed at 2100 engine (rpm) | | 1130 |
Cuts per minute (2 x 6 knives) (c/min) | | 6780 |
Length of cut range (2 x 6 knives) (mm) | | 8 - 44 |
Cuts per minute (2 x 8 knives) (c/min) | | 9060 |
Length of cut range (2 x 8 knives) (mm) | | 6 - 33 |
Cuts per minute (2 x 12 knives) (c/min) | | 13600 |
Length of cut range (2 x 12 knives) (mm) | | 4 - 22 |
Cuts per minute (2 x 16 knives) (c/min) | | 18100 |
Length of cut range (2 x 16 knives) (mm) | | 3 - 16 |
Cuts per minute (2 x 20 knives) (c/min) | | 22600 |
Length of cut range (2 x 20 knives) (mm) | | 2 - 13 |
Adjust-O-Matic™ shearbar setting | | |
Automatic knife sharpening system | | |
Automatic knife sharpening system with reverse drive | | |
Variflow™ system | | Shift between crops in under two minutes |
Roll diameter (mm) | | 250 |
Two-roll system with saw tooth profile (teeth) | | 99 / 126 / 166 |
Chrome coated two-roll system with 99/126 teeth combination | | |
Width crop processor rolls (mm) | | 750 |
10% speed differential | | - |
22% speed differential | | |
30% speed differential (only with 99/126 teeth combination) | | |
50% speed differential (whole crop) | | |
Roll clearance range (electro-hydraulic adjustment) (mm) | | 1-6 |
Manual clearance control (optional 200mm rolls) | | - |
Remote electro-hydraulic clearance control (250mm rolls) | | |
Blower rotor diameter (mm) | | 525mm (20.67 inch) |
Blower rotor width (mm) | | 750mm (29.53 inch) |
Blower speed at 2100 engine (rpm) | | 2119 |
Spout maximum height (mm) | | 6400 |
Rotation angle (°) | | 210 |
Spout extension (10-row maize header) (mm) | | 720 |
Spout extension (12-row maize header) (mm) | | 1380 |
Automatic spout functions (home and work positions) | | |
Spout side collision protection | | |
Abrasive option | | |
12 volt alternator Standard / Optional (Amps) | | 185 |
Battery capacity (CCA / Ah) | | 3 x 800 / 107 |
Hydrostatic | | |
Gearbox | | 4-speed |
Remote gearshifting | | |
Differential lock | | |
Mechanical powered rear wheels | | |
Maximum road speed @ 1400rpm (kph) | | 40 |
Automatic stubble height control | | |
Pressure compensation mode | | |
Autofloat™ system | | |
Mechanical Lateral flotation | | |
Power Reverse™ hydraulic header reverser | | |
Hydraulic quick coupler (single location) | | |
Automatic header speed synchronisation to forward speed | | |
Cab glass area (m³) | | 6.8 |
Cab category level - EN 15695 | | 1 |
HID lighting pack | | |
Air-suspension seat | | |
Instructor’s seat | | |
IntelliView™ IV monitor with adjustable position | | |
3 viewing camera’s | | |
Manual Air-conditioning and heating | | |
Automatic climate control and coolbox | | |
MP3 Bluetooth radio (hands free phone calls) | | |
Automatic greasing system | | |
Optimum cab noise level - ISO 5131 (dB(A)) | | 76 |
New Holland Precision Land Management systems | | |
Automatic row guidance system for maize headers | | |
IntelliFill™ system | | |
Optional additive tank (with adjustable flow) capacity (l) | | 400 |
Moisture measuring | | |
Yield measuring and moisture measuring | | |
Full Precision farming package including | | |
Yield measuring and moisture measuring, DGPS yield mapping | | |
PLM desktop software and software support service | | |
Weight*** (kg) | | 13060 |