T4000 Deluxe & SuperSteer

65 to 97 hp

PTO AND HYDRAULICS

 

  • HOW MANY PTO SPEEDS DO YOU NEED?

    All T4000 models are offered with up to four PTO speeds; ground speed, 540, 540E, 1000. These can be selected by a lever within the cab. PTO engagement is via the established New Holland servo assisted engagement lever. This reduces the operating pressure required to engage the clutch, making it a simple task to manually modulate power fed to the implement.
  • HYDRAULIC POWER FOR EVERY NEED

    A powerful 48.6 litre/min hydraulic pump is standard on T4000. Mounted in tandem with a separate steering pump, the separate hydraulic pump will deliver its full capacity regardless of load on the steering circuit. If additional hydraulic capacity is required, a 63.8 litre/min MegaFlow™ pump can be specified.
  • MECHANICAL HYDRAULICS WITH LIFT-O-MATIC

    Where specified, the mechanical hydraulic system features proven Flexion Bar™ lower link draft sensing. This offers excellent weight transfer performance and easily adjusted sensitivity. Lift-O-Matic is standard and enables an implement to be raised and lowered to its previous setting using a single control. Also, a mechanical lift height control limiter ensures accurate implement lift height setting which eliminates the risk of damaging PTO shafts.
  • ADVANCED ELECTRONIC DRAFT CONTROL FOR OPTIMUM PERFORMANCE

    Electronic draft control, EDC, is available. Easy to operate and of proven dependability, EDC on certain models can be linked to the axle differentials. When the rear linkage is lowered, the differentials are locked. As the linkage is raised, the differentials are unlocked. Automatically. Fender mounted lift and lower buttons are standard with EDC.