H6000 Series Heavy-Duty and HM200 Series Economy Disc Mowers

MODEL SPECIFICATIONS

Standard

Optional at extra cost

		H6830 Side Pull
Cutter Bar
Cutting width, ft. in. (mm)		10' 4" (3150)
Cutting height, in. (mm)		.95-3.25 (24-82.5)
Cutter bar tilt angle, degrees		-2 to -10
Cutter bar operating range, degrees		+18 to -28
Breakaway angle, degrees		NA
Cutter bar floatation		Vertical and lateral, adjustable springs
Type cutterbar		MowMax™ cutterbar, modular, w/individual sealed reservoirs
Number of discs		8
Knives per disc		2
Disc cutting diameter, in. (mm)		19.7 (500)
Disc drive		Bevel gears in sealed modules
Disc speed, RPM		2,835
Cutter bar gear protection		Std. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard, in. (mm)		95" (2413)
Swath width with optional swathboards, in. (m)		NA
Dimensions and Weight
Overall width, in. (mm)		196 (4978)
Overall length, in. (mm)		183 (4648)
Height - transport position*, in. (mm)		62 (1575)
Weight, Shipping lb. (kg)		3,035 (1379)
Weight, Operating lb. (kg)		2,610 (1186)
Maximum transport speed		20 mph/ 32.2 kph
Tires/wheels		27 x 9.5 x 15 6 PR
Driveline
Minimum PTO horsepower required, hp (kW)		60 (44.7)
Input speed, RPM		540
PTO shaft spline/size required		6-spline/ 1 3/8"
Driveline protection		Belt drive to cutter bar
Overrunning clutch
Belt tension		NA
Hydraulics and Hitch
Hydraulic circuits required		Two remotes
Minimum relief pressure required, psi (bar)		1,500 (104)
Hitch		Category II drawbar

See product brochure for full specifications and options.