Type | | Chevron-design intermeshing molded rubber rolls |
Length, in. (mm) | | 90 (2286) |
Diameter, in. (mm) | | 10.4 (264) |
Drive | | 4 HB V-belt and enclosed gears |
Speed, rpm | | 647 |
Conditioner Adjustment | | Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
Height, Transport, ft. in. (m) | | 5' 8" (1.7) |
Height, Operating, ft. in. (m) | | 4' 5" (1.3) |
Width, Transport, ft. in. (m) | | 9' 11" (3.0) with standard drawbar hitch |
Width, Operating, ft. in. (m) | | 14' 10" (4.52) with standard drawbar hitch |
Width, Operating, ft. in. (m) | | |
Width, Operating, ft. in. (m) | | |
Length, Transport, ft. in. (m) | | 17' 7" (5.3) with standard drawbar hitch |
Length, Transport, ft. in. (m) | | |
Length, Transport, ft. in. (m) | | |
Length, Operating, ft. in. (m) | | 17' 2" (5.2) with standard drawbar hitch |
Length, Operating, ft. in. (m) | | |
Length, Operating, ft. in. (m) | | |
Weight, Operating lbs. (kg) | | 3,690 (1674) |
| | 540 rpm PTO, enclosed gears and four HB belt |
| | Slip clutch and over-running clutch |
Hydraulic swing | | Standard (double-acting cylinder) |
Hydraulic lift | | Standard (operated by two single-acting cylinders; master/slave) |
Hydraulic tilt | | Optional (operated by single-acting cylinder and incorporated into the lift system) |
Swath, ft. (mm) | | 6 (1829) |
Windrow, ft. (mm) | | Adjustable from 3 to 6 (914 to 1829) |
Number of discs | | 7 |
Number of knives | | 14 (2 per disc) |
Speed, rpm | | 3000 |
Cutting width, ft. in. (mm) | | 9' 2" (2800) |
Cutting angle | | 2 to 10 degrees, mechanical or hydraulic control |
Cutting height, in. (mm) | | 0.95 to 3.2 (24 to 81) with standard skid shoes |
Ground clearance with header fully raised, in. (mm) | | 17 (432) |
Flotation | | Vertical and lateral, adjustable springs |
Operating, mph (kph) | | 0 to 9 (0 to 14.5) |
Transport, mph (kph) | | 20 (32) |
| | 65 PTO hp (48 kW) or greater with standard ASAE Category II drawbar. |
| | All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
Size | | 9.5L x 14 6PR |