H7000 Series Discbine® Disc Mower-Conditioner

MODEL SPECIFICATIONS

 

H7550

Conditioner  

Type

Flail system with 100 tapered flails and optional textured

Length, in. (mm)

102 (2591)

Diameter, in. (mm)

22 (560)

Drive

4 HB V-belt

Speed, rpm 

1011std or optional 726

Conditioner Adjustment

Adjustable rotor hood with replaceable smooth liner
Dimensions 

Height, Transport, ft. in. (m)

6' 8" (2.6)

Height, Operating, ft. in. (m)

5' 8" (1.7)

Width, Transport, ft. in. (m)

13' 2" (4.0) with standard drawbar hitch, 2-pt swivel hitch or drawbar swivel hitch

Width, Operating, ft. in. (m)

19' 5" (5.9) with standard drawbar hitch

Width, Operating, ft. in. (m) 

21' 3" (6.5) with 2-pt swivel hitch

Width, Operating, ft. in. (m)  

19' 7" (5.9) with drawbar swivel hitch

Length, Transport, ft. in. (m)

24' 7" (7.2) with standard drawbar hitch

Length, Transport, ft. in. (m) 

26' 5" (8.1) with 2-pt swivel hitch

Length, Transport, ft. in. (m)  

25' 5" (7.4) with drawbar swivel hitch

Length, Operating, ft. in. (m)

20' 8" (6.3) ) w/std drawbar hitch

Length, Operating, ft. in. (m) 

22' 7" (6.9) w/2-pt swivel hitch

Length, Operating, ft. in. (m)  

21' 7" (6.6) w/drawbar swivel hitch

Weight, Operating lbs. (kg)

5,680 (2576)
Drive 

 

1000 rpm PTO, enclosed gears and four HB belt
Drive Protection 

  

Slip clutch and over-running clutch
Hydraulics 

Hydraulic swing

Standard (double-acting cylinder)

Hydraulic lift

Standard (operated by two single-acting cylinders; master/slave)

Hydraulic tilt

Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge 

Swath, ft. (mm)

8 (2438)

Windrow, ft. (mm)

Adjustable from 3 to 8 (914 to 2438)
MowMax™Cutterbar with ShockPRO™Hubs 

Number of discs

10

Number of knives

20 (2 per disc)

Speed, rpm

3000

Cutting width, ft. in. (mm)

13 (3960)

Cutting angle

2 to 10 degrees, hydraulic control

Cutting height, in. (mm)

0.95 to 3.2 (24 to 81) with standard skid shoes

Ground clearance with header fully raised, in. (mm)

18 (457)

Flotation

Vertical and lateral, adjustable springs
Speeds 

Operating, mph (kph)

0 to 9 (0 to 14.5)

Transport, mph (kph)

20 (32)
Tractor Requirement 

   

90 PTO hp (67 kW) or greater with standard Category II, or Category III drawbar or Category III 3-point hitch.

    

All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights.
Tubeless Ag Rib Implement Tires 

Size

31 x 13.5-15

See product brochure for full specifications and options.

Special Offer

ENTER YOUR ZIP OR POSTAL CODE BELOW TO GET THIS OFFER

0% FOR 60 MONTHS ON ALL NEW MAJOR NEW HOLLAND AGRICULTURE HAY AND FORAGE EQUIPMENT, OFFER ENDS JUNE 30, 2014.

Disclaimer
Country *
ZIP *