Discbine® Center-Pivot Disc Mower-Conditioners

TECHNICAL SPECIFICATIONS

 

Discbine 313 (roll)

Discbine 313 (flail)

Discbine 316 (roll)

Discbine 316 (flail)

MowMax II Cutterbar with ShockPRO hubs     

Cutting width ft. in. (m)

13' 0" (4.0)13' 0" (4.0)16' 3" (4.95)16' 3" (4.95)

Cutting height in. (mm)

0.79 - 2.7 (20 - 69)0.79 - 2.7 (20 - 69)0.79 - 2.7 (20 - 69)0.79 - 2.7 (20 - 69)

Cutting height w/opt. high-stubble shoes in. (mm)

3.1-5.5 (79-140)3.1-5.5 (79-140)3.1-5.5 (79-140)3.1-5.5 (79-140)

Cutting height w/opt. Biomass shoes in. (mm)

4.9-7.8 (124-198)4.9-7.8 (124-198)4.9-7.8 (124-198)4.9-7.8 (124-198)

Cutting height w/opt. adjustable shoes in. (mm)

0.79-5.8 (20-147)0.79-5.8 (20-147)0.79-5.8 (20-147)0.79-5.8 (20-147)

Cutterbar tilt angle degrees

2 - 102 - 102 - 102 - 10

Type cutterbar

ModularModularModularModular

Number of discs/knives per disc

8/28/210/210/2

Disc speed @ 1000 rpm PTO speed rpm

2250225022502250

Knife tip speed @ 1000 rpm PTO speed mph (k/h)

162 (261)162 (261)162 (261)162 (261)

Cutterbar flotation

Vertical and lateral, adjustable springsVertical and lateral, adjustable springsVertical and lateral, adjustable springsVertical and lateral, adjustable springs

Cutterbar drive method

PTO drive w/slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbarPTO drive w/slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbarPTO drive w/slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbarPTO drive w/slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbar
Conditioner 

Type

Chevron intermeshing molded rubber, or chevron intermeshing steel rollsFlail Rotor w/120 tapered flailsChevron intermeshing molded rubber, or chevron intermeshing steel rollsFlail Rotor w/120 tapered flails

Length in. (mm)

125 (3175)125 (3175)125 (3175)125 (3175)

Diameter in. (mm)

2 x 10.4 (264) rolls1 x 22 (560) flail rotor2 x 10.4 (264) rolls1 x 22 (560) flail rotor

Conditioner drive method

4 HB v-belt & enclosed gears4 HB v-belt4 HB v-belt & enclosed gears4 HB v-belt

Speed rpm

750 or 6401042 std. 752 opt.750 or 6401042 std. 752 opt.

Conditioning roll tension adjustment

Single crankNASingle crankNA

Conditioner gap adjustment

Drawbolt stop, each endSingle crank adjustment of rotor hoodDrawbolt stop, each endSingle crank adjustment of rotor hood

Swath width ft. (m)

10 (3.0)10 (3.0)10 (3.0)10 (3.0)

Windrow width ft. (m)

3 - 8 (.9 - 2.4)3 - 8 (.9 - 2.4)3 - 8 (.9 - 2.4)3 - 8 (.9 - 2.4)
Driveline 

Input speed rpm

1000100010001000

Driveline protection

Slip clutch and overrunning clutch assembly @ rear of PTO shaftSlip clutch and overrunning clutch assembly @ rear of PTO shaftSlip clutch and overrunning clutch assembly @ rear of PTO shaftSlip clutch and overrunning clutch assembly @ rear of PTO shaft
Tractor Requirements 

Minimum PTO power required hp (kW)

90 (67)90 (67)100 (75)100 (75)

PTO shaft spline/size requirements

21-spline/1 3/8"21-spline/1 3/8"21-spline/1 3/8"21-spline/1 3/8"

Hydraulic circuits required

2222

Minimum relief pressure required, psi (bar)

1500 (103)1500 (103)1500 (103)1500 (103)

Electrical

7-pin electrical connector for transport lights7-pin electrical connector for transport lights7-pin electrical connector for transport lights7-pin electrical connector for transport lights

Drawbar/3-pt Hitch

ASAE Cat. II or III drawbar or Cat. III 3-pt hitchASAE Cat. II or III drawbar or Cat. III 3-pt hitchASAE Cat. III drawbar or Cat. III 3-pt hitchASAE Cat. III drawbar or Cat. III 3-pt hitch
Tires 

Tubless Ag rib implement tires

12.5L x 15 8PR12.5L x 15 8PR12.5L x 15 8PR12.5L x 15 8PR
Transport Speed, Maximum 

Transport Speed, Maximum mph

20 (32)20 (32)20 (32)20 (32)
Dimensions ¹ and Weight ² 

Width, transport ft. in. (m)

13' 4" (4.04)13' 4" (4.04)16' 7" (5.05)16' 7" (5.05)

Width, operating ft. in. (m)

21' 3" (6.5) w/2-pt swivel hitch; 19' 7" (6.0) w/drawbar swivel hitch21' 3" (6.5) w/2-pt swivel hitch; 19' 7" (6.0) w/drawbar swivel hitch25' 7"(7.8) w/2-pt swivel hitch; 23' 11" (7.3) w/drawbar swivel hitch25' 7"(7.8) w/2-pt swivel hitch; 23' 11" (7.3) w/drawbar swivel hitch

Length, transport ft. in. (m)

27' 5" (8.4) w/2-pt swivel hitch; 26' 5" (8.1) w/drawbar swivel hitch27' 5" (8.4) w/2-pt swivel hitch; 26' 5" (8.1) w/drawbar swivel hitch32' 0" (9.7) w/2-pt swivel hitch; 31'' 0" (9.4) w/drawbar swivel hitch32' 0" (9.7) w/2-pt swivel hitch; 31'' 0" (9.4) w/drawbar swivel hitch

Length, operating ft. in. (m)

23' 0" (7.0) w/2-pt swivel hitch; 22' 0" (6.7) w/drawbar swivel hitch23' 0" (7.0) w/2-pt swivel hitch; 22' 0" (6.7) w/drawbar swivel hitch26' 7" (8.1) w/2-pt swivel hitch; 25' 7" (7.8) w/drawbar swivel hitch26' 7" (8.1) w/2-pt swivel hitch; 25' 7" (7.8) w/drawbar swivel hitch

Height, transport ft. in. (m)

7' 5" (2.26)7' 5" (2.26)7' 5" (2.26)7' 5" (2.26)

Height, operating ft. in. (m)

6' 7" (2.01)6' 7" (2.01)6' 7" (2.01)6' 7" (2.01)

Ground clearance w/header fully raised in. (mm)

16.2 (411)16.2 (411)16.2 (411)16.2 (411)

Weight, Shipping lb. (kg)

Less Hitch 6420 (2912); w/2pt or dbr 6595 (2991)Less Hitch 6420 (2912); w/2pt or dbr 6595 (2991)Less Hitch 6845 (3104); w/2pt or dbr 7020 (3184)Less Hitch 6845 (3104); w/2pt or dbr 7020 (3184)

Weight, Operating lb. (kg)

w/2pt or dbr 6275 (2846)w/2pt or dbr 6275 (2846)w/2pt or dbr 6700 (3039)w/2pt or dbr 6700 (3039)
See product brochure for full specifications and options.

¹ Length and Height- Flail curtain is down for all height and length measurements.
¹ Length- windrow shields fully open for length in both transport and operating positions.
¹ Length with flail curtain up should be reduced by 2" (50.8mm).
² Weights shown with rubber conditioning rolls. For weight w/steel conditioning rolls add 100 (45).