Two Position | |  |
Diameter, in. (mm) | | 20.5 (525) |
Width, in (mm) | | 30 (750) |
Speed rpm | | 2119 |
Type | | Chevron |
Width. in. (mm) | | 34.5 (862) |
Cutterhead diameter, in. (mm) | | 28 (700) |
Speed, rpm | | 1132 |
Electrical System Type | | 12 volt w/190 amp alternator |
Batteries | | 2 |
Make | | FPT |
Displacement, cu. in. (L) | | 787 (12.9L) |
Configuration | | In line 6 |
R120 power @ 1800 RPM, HP (kW) *** | | 500 (368) |
Fuel Capacity, U.S. gal. (L) | | 280 (1080) |
Optional 85 gal. fuel tank | | Yes |
Number of Feedrolls | | 4 |
Width of housing, in. (mm) | | 33.5 (837) |
Metal Detector | | |
Harvesting unit Drive | | Hydrostatic |
No. of length of cut changes, in. (mm) | | 25 - 1.3 (6-33) |
Standard | | Yes |
Roll diameter, in. (mm) | | 10 (253) |
Roll speed (upper), rpm | | 3890 |
Roll spacing, in. (mm) | | 1/32 to 7/16 (1 to 10) |
Gap Adjustment | | In-Cab |
Roll speed (lower), rpm | | 3131 |
Reverse rotation | | |
Automatic from cab | | |
Maximum ground speed, mph (km/h) | | 25 (40) |
Propelling Drive | | Hydrostatic |
Row-Track Guidance | |  |
Rotation, degrees | | 210 |
Hydraulic height position | | Yes |
No. of wear liners | | 3 |
Double-cap deflector | | Yes |
Transmission | | 4 range w/ electric shift |