H7150 Haybine® Mower-Conditioner

TECHNICAL SPECIFICATIONS

 

H7150-14-foot

H7150-16-foot

H7150-18-foot

Auger    

Auger

Single, full floating, 20-in (508 mm) auger with 5 in (178 mm) flightingSingle, full floating, 20-in (508 mm) auger with 5 in (178 mm) flightingSingle, full floating, 20-in (508 mm) auger with 5 in (178 mm) flighting

Floating range, in. (mm)

2 (50.8)2 (50.8)2 (50.8)

Speed, rpm

287287287
Conditioner 

Conditioner

Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustmentChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustmentChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment

Roll length (crushing area), in. (mm)

102 (2591)102 (2591)102 (2591)

Roll diameter, in. (mm)

10.375 (263.5)10.375 (263.5)10.375 (263.5)

Drives

Spur drive gearbox and PTOsSpur drive gearbox and PTOsSpur drive gearbox and PTOs

Speed, rpm 

717717717

Pressure, lbs./in. (N/mm)

2 to 38 (0.3 to 6.6)2 to 38 (0.3 to 6.6)2 to 38 (0.3 to 6.6)

Roll gap adjustment

WrenchWrenchWrench

Material discharge, in. (mm)

Adjustable gate for swath, windrow or intermediate widthsAdjustable gate for swath, windrow or intermediate widthsAdjustable gate for swath, windrow or intermediate widths

  

38 to 96 (965 to 2438)38 to 96 (965 to 2438)38 to 96 (965 to 2438)
Cutterbar 

Cutterbar

Two opposing assemblies, timed, dual, counter-stroking sicklesTwo opposing assemblies, timed, dual, counter-stroking sicklesTwo opposing assemblies, timed, dual, counter-stroking sickles

Knives

Bolted, over-serrated sections, adjustable hold-dohold-downsBolted, over-serrated sections, adjustable hold-dohold-downsBolted, over-serrated sections, adjustable hold-dohold-downs

Guards

Twin, forged steel, double-hardenedTwin, forged steel, double-hardenedTwin, forged steel, double-hardened

Cutting height, in. (mm)

1.2 to 6.2 (30 to 157)1.2 to 6.2 (30 to 157)1.2 to 6.2 (30 to 157)

Cutting angle, degrees

-6 to -12-6 to -12-6 to -12

Hydraulic tilt

Guard points max lift, in. (mm)

25 (635) 25 (635)25 (635)

Skid shoes

444

Sickle drive

Open, dual wobbleOpen, dual wobbleOpen, dual wobble

Sickle speed, spm

181018101810

Sickle stroke, in. (mm)

3 (76)3 (76)3 (76)
Cutting Width 

Cutting Width, ft. in. (mm)

14'3" (4343)16'3" (4953)18'3" (5563)
Dimensions 

Overall width, operating, ft. in. (mm)

16'3" (4953)18'3" (5563)20'3" (6172)

Overall width, transport, ft. in. (mm)

16’ 3” (4953)18’ 3” (5563)20’ 3” (6172)

Overall length, transport, ft. in. (mm)

25’ 11” (7900)25’ 11” (7900)29’ 7” (9020)

Overall height, operating, ft. in. (mm)

6’ 1” (1850)6’ 1” (1850)6’ 1” (1850)

Overall height, raised, ft. in. (mm)

6’ 8” (2030)6’ 8” (2030)6’ 8” (2030)
Drive 

Drive

1000 rpm PTO1000 rpm PTO1000 rpm PTO
Hydraulic Cylinders 

Hydraulic Cylinders

Standard header liftStandard header liftStandard header lift

    

Standard tongue shiftStandard tongue shiftStandard tongue shift
Minimum Tractor Req 

Minimum Tractor Req

70 hp (52kw)70 hp (52kw)70 hp (52kw)

 

Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed 

Operating Speed , mph (kph)

up to 8 (13)up to 8 (13)up to 8 (13)

Max safe transport speed, mph (kph)

20 (32)20 (32)20 (32)
Reel 

Reel

5-bat, all steel, segmented tine bars and full-flex tines5-bat, all steel, segmented tine bars and full-flex tines5-bat, all steel, segmented tine bars and full-flex tines

Peripheral speed, mph (kph)

6.5 to 10.9 (10.46 to 17.54)6.5 to 10.9 (10.46 to 17.54)6.5 to 10.9 (10.46 to 17.54)

Speed Adjustment

Variable sheaveVariable sheaveVariable sheave

Diameter (maximum), ft. in. (mm)

42” (1067)42” (1067)42” (1067)

Adjustments

Fore/aft, vertical, pitchFore/aft, vertical, pitchFore/aft, vertical, pitch

Drive 

Belt and chainBelt and chainBelt and chain

Bushings/bearings, in. (mm)

1.25 (31.75) bearing w/collar at cam end and bushings at all other locations1.25 (31.75) bearing w/collar at cam end and bushings at all other locations1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires 

Tires

31 x 13.50-15, 8PR agricultural Implement31 x 13.50-15, 8PR agricultural Implement31 x 13.50-15, 8PR agricultural Implement

   

Tractor Hookup 

Tractor Hookup

New patented, tongue-mounted, swiveling pumpNew patented, tongue-mounted, swiveling pumpNew patented, tongue-mounted, swiveling pump
Weight 

Weight, lbs. (kg)

6,825 (3096)7,045 (3196)7,345 (3332)
See product brochure for full specifications and options.