Auger | | NA | NA | NA |
Floating range, in. (mm) | | NA | NA | NA |
Speed, rpm | | NA | NA | NA |
Conditioner | | Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment | Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment | Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment |
Roll length (crushing area), in. (mm) | | 85 (2159) | 102 (2591) | 110 (2794) |
Roll diameter, in. (mm) | | 7-3/4 (199) | 10-3/8 (264) | 10-3/8 (264) |
Drives | | Individual, #50 roller chain | Individual, #50 roller chain | Gear/shaft |
Speed, rpm | | 818 | 637 | 665 |
Pressure, lbs./in. (N/mm) | | 2 to 38 (0.3 to 6.6) | 2 to 38 (0.3 to 6.6) | 2 to 38 (0.3 to 6.6) |
Roll gap adjustment | | Shims | Shims | Shims |
Material discharge, in. (mm) | | Adjustable gate for swath, windrow or intermediate widths | Adjustable gate for swath, windrow or intermediate widths | Adjustable gate for swath, windrow or intermediate widths |
| | 38 and 72 (965 and 1829) | 38 and 96 (965 and 2438) | 38 and 100 (965 and 2540) |
Cutterbar | | One assembly | One assembly | Two opposing assemblies, timed, dual, counter-stroking sickles |
Knives | | Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles | Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles | Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles |
Guards | | Twin, forged steel, double-hardened hold-downs | Twin, forged steel, double-hardened hold-downs | Twin, forged steel, double-hardened hold-downs |
Cutting height, in. (mm) | | 1.25 to 4.25 (32 to 108) | 1.25 to 4.25 (32 to 108) | 1.25 to 6.25 (32 to 159) |
Cutting angle, degrees | | -7 or -10 | -7 or -10 | -4 to -10, mech std |
Hydraulic tilt | | NA | NA |  |
Guard points max lift, in. (mm) | | 18-1/2 (470) | 19 (483) | 19-1/2 (495) |
Skid shoes | | 2 | 2 | 2 |
Sickle drive | | wobble joint | wobble joint | enclosed gearbox |
Sickle speed, spm | | 1632 | 1632 | 1700 |
Sickle stroke, in. (mm) | | 3 (76) | 3 (76) | 3 (76) |
Cutting Width, ft. in. (mm) | | 7'3" (2210) | 9'3" (2819) | 12'3" (3734) |
Overall width, operating, ft. in. (mm) | | 11'11" (3632) | 13'8-1/4" (4172) | 19'8" (5994) |
Overall width, transport, ft. in. (mm) | | 10'4-3/4" (3168) | 12'2" (3708) | 13'9" (4191) |
Overall length, transport, ft. in. (mm) | | 13'1" (3988) | 13'4" (4064) | 21'6" (6553) |
Overall height, operating, ft. in. (mm) | | 3'5-3/4" (1060) | 3'6" (1067) | 6'2-1/2" (1892) |
Overall height, raised, ft. in. (mm) | | 4'8" (1422) | 5'7" (1702) | 6'8-1/2" (2045) |
Drive | | 540 rpm PTO | 540 rpm PTO | 540 or 1000 rpm PTO |
Hydraulic Cylinders | | Optional header lift, Rope control | Optional header lift, Rope control | Standard header lift, Standard tongue shift |
Minimum Tractor Req | | 30-hp (22.4 kw) | 35-hp (26.1 kw) | 60-hp (45 kw) |
| | One remote hydraulic circuit required, capable of 1500 psi (10342 kpa) | One remote hydraulic circuit required, capable of 1500 psi (10342 kpa) | Two remote hydraulic circuits required capable of 1750 psi (12066 kpa) |
Operating Speed, mph (kph) | | up to 8 (13) | up to 8 (13) | up to 8 (13) |
Max safe transport speed, mph (kph) | | 25 (40) | 25 (40) | 25 (40) |
Reel | | 4-tine bar | 4-tine bar | Rolareel |
Peripheral speed, mph (kph) | | 6.2 to 8.2 (10.4 to 13.2) | 6.5 to 8.6 (10.5 to 13.8) | standard: 4.8 to 7.9 (7.7 to 12.7), with reduction kit 4.0 to 6.6 (6.5 to 10.7) |
Speed Adjustment | | Variable sheave | Variable sheave | Variable sheave |
Diameter (maximum), ft. in. (mm) | | 3'6-1/4" (1073) | 3'6-1/4" (1073) | 3'7-1/2" (1105) |
Adjustments | | Fore/aft, vertical, pitch | Fore/aft, vertical, pitch | Fore/aft and vertical |
Drive | | Belt and chain | Belt and chain | Belt and chain |
Bushings/bearings, in. (mm) | | 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations | 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations | 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations |
Tires | | 25 x 7.50-15 flotation | 27 x 9.50-15 flotation | 11L x 14 4-ply ag implement (HUT) |
Tractor Hookup | | Equal-angle PTO | Equal-angle PTO | Hydrostatic |
Weight, lbs. (kg) | | 2110 (957) | 2763 (1253) | 4480 (2032) |