Pull-Type Forage Harvesters

TECHNICAL SPECIFICATIONS

 

FP230

FP240

Specifications   

Weight (single axle), lbs. (kg)

4500 (2040)4700 (2130)

Length, ft. in. (m)

21' 6" (6.5 m)21' 6" (6.5 m)

Height with standard spout, ft. in. (m)

11' 2" (3.4 m)11' 2" (3.4 m)

Width, ft. in. (m)

10' 8" (3.3 m)10' 8" (3.3 m)

Number/type of knives

12 single-edge hardened alloy12 single-edge hardened alloy

Cutterhead, type/speed

Cylinder, 850 rpmCylinder, 850 rpm

Cutterhead, diameter, in. (mm)

21" (533.4 mm)21" (533.4 mm)

Throat opening, in. (mm)

22" x 6-5/8" (558.8 mm x 167.7 mm)24-3/8" x 6-5/8" (619.76 mm x 167.6 mm)

Shearbar

Quick adjust, reversible, hard-faced on vertical and horizontal surfacesQuick adjust, reversible, hard-faced on vertical and horizontal surfaces

Length of cut, in. (mm)

3/16" to 7/16" (76.2 to 177.8 mm)3/16" to 7/16" (76.2 to 177.8 mm)

Blower speed

1000 rpm1000 rpm

Recommended max. tractor hp

225 PTO hp300 hp

Minimum power required

150 PTO hp180 PTO hp

Knife sharpener

3" manual, built-in3" manual, built-in

Recutter screens (non processor units)

6 sizes available6 sizes available

Vertical wheel adjustment, in. (mm)

6" (152 mm)6" (152 mm)

Tire sizes, single axle

31x13.5-158PR standard, 14Lx16.1 8PR optional14Lx16.1 8PR standard

Tire sizes, tandem axle

11Lx15-156PR11Lx15-15 6PR
Optional CropPro™ Crop Processor 

Optional CropPro™ Crop Processor

Construction

Hardened ductile iron, steel shaftHardened ductile iron, steel shaft

Weight, lbs. (kg)

490 lbs (218kg)520 lbs (231kg)

Roll width, in. (mm)

24.5" (622.3 mm)26-7/8" (682.6 mm)

Roll diameter, in. (mm)

7-7/8" (200 mm)7-7/8" (200 mm)

Roll gap, in. (mm)

3/16" to 5/8" (4.8 to 15.9 mm)3/16" to 5/8" (4.8 to 15.9 mm)

Roll speed

2650 rpm upper, 2250 rpm lower2650 rpm upper, 2250 rpm lower
See product brochure for full specifications and options.