New Holland S1000 sprayers include an efficient tank design and an easy-to-use plumbing control for top spraying performance in the field with fewer problems.
SAFE, CONVENIENT MIXING ACCESS
The optional ground-level, 12-gallon induction tank allows for safe, convenient mixing. The low-profile design provides easy access for adding dry and liquid formulations and water soluble paks. A ball valve at the bottom of the tank enables easy clean out and drainage. A "C-seal" screw lid prevents dust buildup.
EASY MAINTENANCE AND SIMPLE CONTROLS
Flange-style sprayer coupler fittings, used for the manifold and plumbing, allow for easy upkeep. The plumbing's chemical-resistant polypropylene material throughout the sprayer provides added protection. A user-friendly central manifold design simplifies plumbing control and operation for increased productivity and reliability.
EASY-READ SIGHT GAUGE
The standard, large-sight gauge allows at-a-glance monitoring of tank levels. Plumbed to the bottom of the tank sump, the gauge provides improved tank-level accuracy.
NOZZLES AND TIPS TO MATCH AGITATION
Four standard sprayer tank agitation nozzles provide all the agitation necessary to mix current chemicals. Interchangeable nozzle tips match various boom widths and product agitation requirements for extra versatility.
NOZZLE AND NOZZLE-BODY OPTIONS
Sprayers may be ordered with or without nozzles and/or bodies. Factory-fit options include:
TeeJet Nozzle Bodies
- Single Quick TeeJet, Double Swivel-Jet, and Triple Quick TeeJet
TeeJet Nozzles (Type Series Degree Type)
- TeeJet XR8000 80 Flat Fan
- TeeJet XR11000 110 Flat Fan
- TeeJet AI1100 110 Air Induction
Combo Jet Nozzle Bodies:
- Single Combo-Jet, Double Combo-Jet, Triple Combo-Jet
- Combo-Jet Nozzles: (Type Series Degree Type)
- Combo-Jet ER8000 80 Extended Range
- Combo-Jet DR8000 80 Drift Reduction
- Combo-Jet MR8000 80 Midrange
- Combo-Jet ER11000 110 Extended Range
BOOM SEGMENT CONTROL OPTIONS
Two ball valves are standard on S1000 sprayers to provide on/off control of boom segments. Depending on the auto-rate system, unlimited ball valves may be added to the existing system for more control. Optional 1-inch, 100-mesh, in-line strainers are available for ball valves. These strainers are mounted on the outlet of each ball valve on the back of the boom assembly for more protection against boom nozzle plugging.
ADDITIONAL PUMP OPTIONS
Various pump options may be ordered to accommodate tractor hydraulics and assorted spray applications. Four hydraulic pumps are offered from Hypro™ and Ace™, including the Hypro HM1C-9306, Hypro HM1C-9606, Hypro HM3C and Ace FMC 206. All Hypro pumps feature an enhanced silicone carbide seal that is helpful when dry runs occur. For faster tank filling, an optional 3-inch bulk bottom fill valve is available for use with 3-inch pumps.