DISCBINE® DISC MOWER-CONDITIONERS

THE DEFINITION OF DISC MOWER-CONDITIONERS

Features

A cut above the rest: MowMax™ II cutterbars

Discbine 313 and 316 center-pivot models feature the MowMax II disc cutterbar, a modular cutterbar designed for the rigors of large harvesting operations.

Faster drying with Wide-Dry™ conditioning

You’ll harvest crops quickly and produce nutritious, highvalue feed with your choice of three conditioning systems.

Fast, simple adjustment, easy serviceability

From the hitch to the swath doors, the Discbine Series 313 and 316 are designed with you in mind.

Gallery

Models

Discbine® 313
Cutting width ft. in. (m)13’ 0” (4.0)
Number of discs8
Minimum PTO power required hp (kW)90 (67)


Standard  Optional 
Discbine® 313
Cutterbar
Cutting width ft. in. (m)13’ 0” (4.0)
Cutterbar modelMowMax™ II with ShockPRO™ hubs
TypeModular
Number of discs8
Knives per disc2
Disc speed @ 1000 rpm PTO speed rpm2,250
Tilt angle degrees2-10
FlotationVertical and lateral, adjustable springs
Drive methodPTO drive w/slip clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm)0.79-2.7 (20-69)
Cutting height w/ opt. high-stubble shoes in. (mm)3.1-5.5 (79-140)
Cutting height w/ opt. Biomass shoes in. (mm)4.9-7.8 (124-198)
Cutting height w/ opt. adjustable shoes in. (mm)0.79-5.8 (20-147)
Roll Conditioners
TypeChevron intermeshing rubber or steel rolls
Length in. (mm)125 (3175)
Diameter in. (mm)10.4 (264)
Drive method4 HB V-belt and enclosed gears
Speed rpm750 or 640
Conditioner roll tension adjustmentSingle crank
Conditioner gap adjustmentAdjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
TypeFlail rotor with 120 tapered flails
Length in. (mm)125 (3175)
Diameter in. (mm)22 (560)
Drive method4 HB v-belt
Speed rpm1042 std. 752 opt.
Conditioner gap adjustmentSingle crank adjustable rotor hood
Crop Discharge
Swath width ft. (m)10 (3.0)
Windrow width ft. (m)3-8 (0.9-2.4)
Driveline
Input speed rpm1000
Driveline protectionSlip clutch and overrunning clutch assembly at rear of PTO shaft
Tongue Options
Tongue typeCenter pivot straight hitch
Hitch typeDrawbar swivel or 2-point swivel
Tractor Requirements
Minimum PTO power required hp (kW)90 (67)
Hydraulic circuits required2
Minimum relief pressure required psi (bar)1,500 (103)
DrawbarASAE Category II or III
3 pt hitch (swivel models)Category III
Electrical7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tires12.5L x 15 8PR
Transport Speed
Max road speed mph (kph)20 (32)
Dimensions
Width-transport ft. in. (m)13’ 4” (4.04)
Width-operating (2 pt swivel hitch) ft. in. (m)21’ 3” (6.5)
Width-operating (drawbar swivel hitch)19’ 7” (6.0)
Length-transport (2 pt swivel hitch) ft. in. (m)27’ 5” (8.4)
Length-transport (drawbar swivel hitch)26’ 5” (8.1)
Length-operating (2pt swivel hitch) ft. in. (m)23’ 0” (7.0)
Length-operating (drawbar swivel hitch)22’ 0” (6.7)
Height-transport ft. in. (m)7’ 5” (2.26)
Height-operating ft. in. (m)6’ 7” (2.01)
Ground clearance with head fully raised in. (mm)16.2 (411)
Weights**
Operating weight6,275 (2846)

Discbine® 316
Cutting width ft. in. (m)16’ 3” (4.95)
Number of discs10
Minimum PTO power required hp (kW)100 (75)


Standard  Optional 
Discbine® 316
Cutterbar
Cutting width ft. in. (m)16’ 3” (4.95)
Cutterbar modelMowMax™ II with ShockPRO™ hubs
TypeModular
Number of discs10
Knives per disc2
Disc speed @ 1000 rpm PTO speed rpm2,250
Tilt angle degrees2-10
FlotationVertical and lateral, adjustable springs
Drive methodPTO drive w/slip clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm)0.79-2.7 (20-69)
Cutting height w/ opt. high-stubble shoes in. (mm)3.1-5.5 (79-140)
Cutting height w/ opt. Biomass shoes in. (mm)4.9-7.8 (124-198)
Cutting height w/ opt. adjustable shoes in. (mm)0.79-5.8 (20-147)
Roll Conditioners
TypeChevron intermeshing rubber or steel rolls
Length in. (mm)125 (3175)
Diameter in. (mm)10.4 (264)
Drive method4 HB V-belt and enclosed gears
Speed rpm750 or 640
Conditioner roll tension adjustmentSingle crank
Conditioner gap adjustmentAdjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
Type–
Length in. (mm)–
Diameter in. (mm)–
Drive method–
Speed rpm–
Conditioner gap adjustment–
Crop Discharge
Swath width ft. (m)10 (3.0)
Windrow width ft. (m)3-8 (0.9-2.4)
Driveline
Input speed rpm1000
Driveline protectionSlip clutch and overrunning clutch assembly at rear of PTO shaft
Tongue Options
Tongue typeCenter pivot straight hitch
Hitch typeDrawbar swivel or 2-point swivel
Tractor Requirements
Minimum PTO power required hp (kW)100 (75)
Hydraulic circuits required2
Minimum relief pressure required psi (bar)1,500 (103)
DrawbarASAE Category III
3 pt hitch (swivel models)Category III
Electrical7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tires12.5L x 15 8PR
Transport Speed
Max road speed mph (kph)20 (32)
Dimensions
Width-transport ft. in. (m)16’ 7” (5.05)
Width-operating (2 pt swivel hitch) ft. in. (m)25’ 7” (7.8)
Width-operating (drawbar swivel hitch)23’ 11” (7.3)
Length-transport (2 pt swivel hitch) ft. in. (m)32’ 0” (9.7)
Length-transport (drawbar swivel hitch)31’ 0” (9.4)
Length-operating (2pt swivel hitch) ft. in. (m)26’ 7” (8.1)
Length-operating (drawbar swivel hitch)25’ 7” (7.8)
Height-transport ft. in. (m)7’ 5” (2.26)
Height-operating ft. in. (m)6’ 7” (2.01)
Ground clearance with head fully raised in. (mm)16.2 (411)
Weights**
Operating weight6,700 (3039)
Back

Standard Optional – Not Available
*Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
**Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.


New Holland Agriculture a brand of CNH Industrial N.V. ©
back to top