MODELS

Discbine® 210

Cutting width (m)3,16
Number of discs8
Tongue OptionsSide-pull, curved tongue
Length, transport (m)Flail Tine: 5.50*** or Roller: 5.23***


Standard  Optional 
Discbine® 210
Cutterbar
Cutting width (m)3,16
Cutterbar modelMowMax™ Modular Cutterbar with ShockPRO™ hubs
Number of discs8
Knives per disc2
Disc speed @ 540 rpm PTO speed rpm3000
Tilt angle degrees2° - 10°
FlotationUp & back, adjustable springs
Drive methodPTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height (mm)Flail Tine: 29-68 or Roller: 24-60
Cutting height w/optional high-stubble shoes (mm)58-115
Cutting height w/optional adjustable shoes (mm)58-115
Roll Conditioners
TypeChevron intermeshing rubber or steel rolls
Length / Diameter (mm)2591 / 264
Drive method4 HB V-belt and enclosed gears
Speed rpm647
Conditioner roll tension adjustmentSingle crank
Conditioner gap adjustmentAdjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
TypeFlail rotor with 100 tapered flails
Length / Diameter (mm)2591 / 560
Drive method4 HB v-belt
Speed rpm718 std. 1000 opt.
Conditioner gap adjustmentSingle crank adjustable rotor hood
Crop Discharge
Swath width (m)2,13
Windrow width (m)0.9-2.13
Driveline
Input speed rpm540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
Driveline protectionSlip clutch and overrunning clutch assembly at rear of PTO shaft
Secondary drivelineDouble CV Driveline - Head repositionable under load
Tongue Options
TypeSide-pull, curved tongue
Hitch typeStandard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch
Tractor Requirements
Minimum PTO power required (kW)60
Hydraulic circuits required2
Minimum relief pressure required (bar)103
DrawbarASAE Category II
Swivel Hitch - DrawbarASAE Category II or III
Swivel Hitch - 2-PointASAE Category II, III-N, or III
Electrical7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tiresFlail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR
Transport Speed
Max road speed (kph)32
Dimensions*
Width, transport (m)3,42
Width , operating (m)4.87 / 5.36, with swivel hitch equipped
Length, transport (m)Flail Tine: 5.50*** or Roller: 5.23***
Length, operating (m)Flail Tine: 5.4*** or Roller: 4.75***
Height (m)Transport: 1.60 / Operating: 1.35
Ground clearance with head fully raised (mm)Flail Tine: 4.32 or Rollet: 4.57
Weights**
Operating weight (kg.)Flail Tine: 1864*** / Roller: 1891***

— Not Available
* Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
** Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.
*** Weights & dimensions are with standard drawbar hitch. Add 150 lbs. (68 kg) & 2 ft. (.60) length for swivel hitch models.

social stream


New Holland Agriculture a brand of CNH Industrial ©
back to top