TECHNICAL SPECIFICATIONS

Standard Optional
Cutterbar
 
Cutting width (m)
Cutterbar model
Number of discs
Knives per disc
Disc speed @ 540 rpm PTO speed rpm
Tilt angle degrees
Flotation
Drive method
Cutting height (mm)
Cutting height w/optional high-stubble shoes (mm)
Cutting height w/optional adjustable shoes (mm)
Discbine® 210
3,16
MowMax™ Modular Cutterbar with ShockPRO™ hubs
8
2
3000
2° - 10°
Up & back, adjustable springs
PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Flail Tine: 29-68 or Roller: 24-60
58-115
58-115
Roll Conditioners
 
Type
Length / Diameter (mm)
Drive method
Speed rpm
Conditioner roll tension adjustment
Conditioner gap adjustment
Discbine® 210
Chevron intermeshing rubber or steel rolls
2591 / 264
4 HB V-belt and enclosed gears
647
Single crank
Adjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
 
Type
Length / Diameter (mm)
Drive method
Speed rpm
Conditioner gap adjustment
Discbine® 210
Flail rotor with 100 tapered flails
2591 / 560
4 HB v-belt
718 std. 1000 opt.
Single crank adjustable rotor hood
Crop Discharge
 
Swath width (m)
Windrow width (m)
Discbine® 210
2,13
0.9-2.13
Driveline
 
Input speed rpm
Driveline protection
Secondary driveline
Discbine® 210
540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
Slip clutch and overrunning clutch assembly at rear of PTO shaft
Double CV Driveline - Head repositionable under load
Tongue Options
 
Type
Hitch type
Discbine® 210
Side-pull, curved tongue
Standard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch
Tractor Requirements
 
Minimum PTO power required (kW)
Hydraulic circuits required
Minimum relief pressure required (bar)
Drawbar
Swivel Hitch - Drawbar
Swivel Hitch - 2-Point
Electrical
Discbine® 210
60
2
103
ASAE Category II
ASAE Category II or III
ASAE Category II, III-N, or III
7-pin electrical connector for transport lights
Tires
 
Tubeless ag rib implement tires
Discbine® 210
Flail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR
Transport Speed
 
Max road speed (kph)
Discbine® 210
32
Dimensions*
 
Width, transport (m)
Width , operating (m)
Length, transport (m)
Length, operating (m)
Height (m)
Ground clearance with head fully raised (mm)
Discbine® 210
3,42
4.87 / 5.36, with swivel hitch equipped
Flail Tine: 5.50*** or Roller: 5.23***
Flail Tine: 5.4*** or Roller: 4.75***
Transport: 1.60 / Operating: 1.35
Flail Tine: 4.32 or Rollet: 4.57
Weights**
 
Operating weight (kg.)
Discbine® 210
Flail Tine: 1864*** / Roller: 1891***

— Not Available
* Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
** Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.
*** Weights & dimensions are with standard drawbar hitch. Add 150 lbs. (68 kg) & 2 ft. (.60) length for swivel hitch models.



New Holland Agriculture a brand of CNH Industrial ©
back to top