PRO-BELT™

MODELS

Pro-Belt™ 165 SuperFeed™

Diameter Min. / Max. (cm)90 / 165
Width (cm)120
MaxiSweep™ pick-up working width (m)2.3
Feeding systemRotor width 520mm 'V' tine configuration


Standard  Optional 
Pro-Belt™ 165 SuperFeed™
Bale dimensions
Diameter Min. / Max. (cm)90 / 165
Width (cm)120
Tractor requirements
Minimum PTO power [kW/hp(CV)]74/100
PTO speed (rpm)1000
Hydraulic remotes required2
Main drive
Main driveTwinDrive™ split gearbox
ProtectionCut-out clutch
Flexible High / Low hitch adjustment
MaxiSweep™ pick-up
Standard working width Standard / Optional (m)2.3
Five tine bar pick-up with rubber tines
Roller windguard
FlotationDouble adjustable spring
Hydraulic pick-up lift
Pick up protectionRadial pin clutch
No tools folding pickup gauge wheels
Gauge wheels (15/6.00 - 6)
Feeding system
Feeding systemRotor width 520mm 'V' tine configuration
ActiveDrop™ floor
SuperFeed™ system
CropCutter™ system
Knives
Theoretical Cut Length (mm)
Knife activation, in - out
Knife protection
Bale formation
TypeRoll-Belt™ technology (Combination of rollers and belts)
Formation rolls2
BeltsFour 273mm endless
Twin Belt drive
Bale shape indicators
Net wrapping systemDuckbill
Net storage net only2
Net coverageEdgeWrap™
Bale density system
Dual density system
Density controlIn-cab control through monitor
Electronic control system
ISO 11783 connection ready
IntelliView™ IV monitor
IntelliBale™ system
Moisture measuring sensor
Electronic safety cut out
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Maximum travelling speeds50kph
Bale ramp
Bale ramp
Baler dimensions
Length (m)4,87
Width on 500/55-20 tyres (m)2,74

Pro-Belt™ 165 CropCutter™

Diameter Min. / Max. (cm)90 / 165
Width (cm)120
MaxiSweep™ pick-up working width (m)2.3
Feeding systemRotor width 520mm 'V' tine configuration


Standard  Optional 
Pro-Belt™ 165 CropCutter™
Bale dimensions
Diameter Min. / Max. (cm)90 / 165
Width (cm)120
Tractor requirements
Minimum PTO power [kW/hp(CV)]88/120
PTO speed (rpm)1000
Hydraulic remotes required2
Main drive
Main driveTwinDrive™ split gearbox
ProtectionCut-out clutch
Flexible High / Low hitch adjustment
MaxiSweep™ pick-up
Standard working width Standard / Optional (m)2.3
Five tine bar pick-up with rubber tines
Roller windguard
FlotationDouble adjustable spring
Hydraulic pick-up lift
Pick up protectionRadial pin clutch
No tools folding pickup gauge wheels
Gauge wheels (15/6.00 - 6)
Feeding system
Feeding systemRotor width 520mm 'V' tine configuration
ActiveDrop™ floor
SuperFeed™ system
CropCutter™ system
Knives25
Theoretical Cut Length (mm)83 / 41
Knife activation, in - outHydraulic
Knife protectionIndividual spring
Bale formation
TypeRoll-Belt™ technology (Combination of rollers and belts)
Formation rolls2
BeltsFour 273mm endless
Twin Belt drive
Bale shape indicators
Net wrapping systemDuckbill
Net storage net only2
Net coverageEdgeWrap™
Bale density system
Dual density system
Density controlIn-cab control through monitor
Electronic control system
ISO 11783 connection ready
IntelliView™ IV monitor
IntelliBale™ system
Moisture measuring sensor
Electronic safety cut out
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Maximum travelling speeds50kph
Bale ramp
Bale ramp
Baler dimensions
Length (m)4,87
Width on 500/55-20 tyres (m)2,74

Pro-Belt™ 190 SuperFeed™

Diameter Min. / Max. (cm)90 / 190
Width (cm)120
MaxiSweep™ pick-up working width (m)2.3
Feeding systemRotor width 520mm 'V' tine configuration


Standard  Optional 
Pro-Belt™ 190 SuperFeed™
Bale dimensions
Diameter Min. / Max. (cm)90 / 190
Width (cm)120
Tractor requirements
Minimum PTO power [kW/hp(CV)]74/100
PTO speed (rpm)1000
Hydraulic remotes required2
Main drive
Main driveTwinDrive™ split gearbox
ProtectionCut-out clutch
Flexible High / Low hitch adjustment
MaxiSweep™ pick-up
Standard working width Standard / Optional (m)2.3
Five tine bar pick-up with rubber tines
Roller windguard
FlotationDouble adjustable spring
Hydraulic pick-up lift
Pick up protectionRadial pin clutch
No tools folding pickup gauge wheels
Gauge wheels (15/6.00 - 6)
Feeding system
Feeding systemRotor width 520mm 'V' tine configuration
ActiveDrop™ floor
SuperFeed™ system
CropCutter™ system
Knives
Theoretical Cut Length (mm)
Knife activation, in - out
Knife protection
Bale formation
TypeRoll-Belt™ technology (Combination of rollers and belts)
Formation rolls2
BeltsFour 273mm endless
Twin Belt drive
Bale shape indicators
Net wrapping systemDuckbill
Net storage net only2
Net coverageEdgeWrap™
Bale density system
Dual density system
Density controlIn-cab control through monitor
Electronic control system
ISO 11783 connection ready
IntelliView™ IV monitor
IntelliBale™ system
Moisture measuring sensor
Electronic safety cut out
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Maximum travelling speeds50kph
Bale ramp
Bale ramp
Baler dimensions
Length (m)5,12
Width on 500/55-20 tyres (m)2,74

Pro-Belt™ 190 CropCutter™

Diameter Min. / Max. (cm)90 / 190
Width (cm)120
MaxiSweep™ pick-up working width (m)2.3
Feeding systemRotor width 520mm 'V' tine configuration


Standard  Optional 
Pro-Belt™ 190 CropCutter™
Bale dimensions
Diameter Min. / Max. (cm)90 / 190
Width (cm)120
Tractor requirements
Minimum PTO power [kW/hp(CV)]88/120
PTO speed (rpm)1000
Hydraulic remotes required2
Main drive
Main driveTwinDrive™ split gearbox
ProtectionCut-out clutch
Flexible High / Low hitch adjustment
MaxiSweep™ pick-up
Standard working width Standard / Optional (m)2.3
Five tine bar pick-up with rubber tines
Roller windguard
FlotationDouble adjustable spring
Hydraulic pick-up lift
Pick up protectionRadial pin clutch
No tools folding pickup gauge wheels
Gauge wheels (15/6.00 - 6)
Feeding system
Feeding systemRotor width 520mm 'V' tine configuration
ActiveDrop™ floor
SuperFeed™ system
CropCutter™ system
Knives25
Theoretical Cut Length (mm)83 / 41
Knife activation, in - outHydraulic
Knife protectionIndividual spring
Bale formation
TypeRoll-Belt™ technology (Combination of rollers and belts)
Formation rolls2
BeltsFour 273mm endless
Twin Belt drive
Bale shape indicators
Net wrapping systemDuckbill
Net storage net only2
Net coverageEdgeWrap™
Bale density system
Dual density system
Density controlIn-cab control through monitor
Electronic control system
ISO 11783 connection ready
IntelliView™ IV monitor
IntelliBale™ system
Moisture measuring sensor
Electronic safety cut out
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Maximum travelling speeds50kph
Bale ramp
Bale ramp
Baler dimensions
Length (m)5,12
Width on 500/55-20 tyres (m)2,74

Standard Optional – Not available​​



New Holland Agriculture a brand of CNH Industrial ©
back to top