Models

FR500

Max. power ISO TR14396 - ECE R120 @ 2000rpm [kW/hp(CV)]368/500
Max. torque ISO 14396 - ECE R120 @ 1500rpm (Nm)2145
Cutterhead diameter (max / min) (mm)710mm / 690mm
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR500
Engine
Engine ModelFPT Cursor 13*
Emission LevelTier 3
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemUnit injectors
Rated power ISO TR14396 - ECE R120 @ 2100rpm [kW/hp(CV)]343/466
Max. power ISO TR14396 - ECE R120 @ 2000rpm [kW/hp(CV)]368/500
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)1643
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)2091
Max. torque ISO 14396 - ECE R120 @ 1500rpm (Nm)2145
Torque rise (2100 to 1500rpm) (%)38
Torque rise (2100 to 1800rpm) (%)27
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1040
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900mm
Cutterhead cylinder width (mm)884mm
Cutterhead diameter (max / min) (mm)710mm / 690mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Automatic knife sharpening system22600
Cuts per minute (2 x 20 knives) (c/min)2 - 13
Automatic knife sharpening system with reverse drive
Length of cut range (2 x 20 knives) (mm)
Adjust-O-Matic™ shearbar setting
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)200 / 250
Two-roll system with saw tooth profile (teeth)77 / 99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential
22% speed differential
30% speed differential (only with 99/126 teeth combination)
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)
Remote electro-hydraulic clearance control (250mm rolls)
Blower
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
Electrical
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual air conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Full Precision farming package including - Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight
Weight** (kg)12750

Standard Optional – Not available
* Developed by FPT Industrial
** Grass configuration

social stream


New Holland Agriculture a brand of CNH Industrial ©
back to top