DISCBINE® DISC MOWER-CONDITIONERS

THE DEFINITION OF DISC MOWER-CONDITIONERS

Features

A cut above the rest: MowMax™ II cutterbars

Discbine 313 and 316 center-pivot models feature the MowMax II disc cutterbar, a modular cutterbar designed for the rigors of large harvesting operations.

Faster drying with Wide-Dry™ conditioning

You’ll harvest crops quickly and produce nutritious, highvalue feed with your choice of three conditioning systems.

Fast, simple adjustment, easy serviceability

From the hitch to the swath doors, the Discbine Series 313 and 316 are designed with you in mind.

Gallery

Technical information

Standard

Optional

Cutterbar


Cutting width ft. in. (m)
Cutterbar model
Type
Number of discs
Knives per disc
Disc speed @ 1,000 rpm PTO speed rpm
Tilt angle degrees
Flotation
Drive method
Cutting height in. (mm)
Cutting height w/ opt. high-stubble shoes in. (mm)
Cutting height w/ opt. Biomass shoes in. (mm)
Cutting height w/ opt. adjustable shoes in. (mm)

Discbine® 313	Discbine® 316
13’ 0” (4.0)	16’ 3” (4.95)
MowMax™ II with ShockPRO™ hubs	MowMax™ II with ShockPRO™ hubs
Modular	Modular
8	10
2	2
2,250	2,250
2-10	2-10
Vertical and lateral, adjustable springs	Vertical and lateral, adjustable springs
PTO drive w/slip clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar	PTO drive w/slip clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
0.79-2.7 (20-69)	0.79-2.7 (20-69)
3.1-5.5 (79-140)	3.1-5.5 (79-140)
4.9-7.8 (124-198)	4.9-7.8 (124-198)
0.79-5.8 (20-147)	0.79-5.8 (20-147)

Roll Conditioners


Type
Length in. (mm)
Diameter in. (mm)
Drive method
Speed rpm
Conditioner roll tension adjustment
Conditioner gap adjustment

Discbine® 313	Discbine® 316
Chevron intermeshing rubber or steel rolls	Chevron intermeshing rubber or steel rolls
125 (3175)	125 (3175)
10.4 (264)	10.4 (264)
4 HB V-belt and enclosed gears	4 HB V-belt and enclosed gears
750 or 640	750 or 640
Single crank	Single crank
Adjustable drawbolt stop, each end	Adjustable drawbolt stop, each end

LeaningEdge Flail Conditioners


Type
Length in. (mm)
Diameter in. (mm)
Drive method
Speed rpm
Conditioner gap adjustment

Discbine® 313	Discbine® 316
Flail rotor with 120 tapered flails	–
125 (3175)	–
22 (560)	–
4 HB v-belt	–
1042 std. 752 opt.	–
Single crank adjustable rotor hood	–

Crop Discharge


Swath width ft. (m)
Windrow width ft. (m)

Discbine® 313	Discbine® 316
10 (3.0)	10 (3.0)
3-8 (0.9-2.4)	3-8 (0.9-2.4)

Driveline


Input speed rpm
Driveline protection

Discbine® 313	Discbine® 316
1000	1000
Slip clutch and overrunning clutch assembly at rear of PTO shaft	Slip clutch and overrunning clutch assembly at rear of PTO shaft

Tongue Options


Type
Hitch type

Discbine® 313	Discbine® 316
Center pivot straight hitch	Center pivot straight hitch
Drawbar swivel or 2-point swivel	Drawbar swivel or 2-point swivel

Tractor Requirements


Minimum PTO power required hp (kW)
Hydraulic circuits required
Minimum relief pressure required psi (bar)
Drawbar
3 pt hitch (swivel models)
Electrical

Discbine® 313	Discbine® 316
90 (67)	100 (75)
2	2
1,500 (103)	1,500 (103)
ASAE Category II or III	ASAE Category III
Category III	Category III
7-pin electrical connector for transport lights	7-pin electrical connector for transport lights

Tires


Tubeless ag rib implement tires

Discbine® 313	Discbine® 316
12.5L x 15 8PR	12.5L x 15 8PR

Transport Speed


Max road speed mph (kph)

Discbine® 313	Discbine® 316
20 (32)	20 (32)

Dimensions


Width-transport ft. in. (m)
Width-operating (2 pt swivel hitch) ft. in. (m)
Width-operating (drawbar swivel hitch) ft. in. (m)
Length-transport (2 pt swivel hitch) ft. in. (m)
Length-transport (drawbar swivel hitch) ft. in. (m)
Length-operating (2pt swivel hitch) ft. in. (m)
Length-operating (drawbar swivel hitch) ft. in. (m)
Height-transport ft. in. (m)
Height-operating ft. in. (m)
Ground clearance with head fully raised in. (mm)

Discbine® 313	Discbine® 316
13’ 4” (4.04)	16’ 7” (5.05)
21’ 3” (6.5)	25’ 7” (7.8)
19’ 7” (6.0)	23’ 11” (7.3)
27’ 5” (8.4)	32’ 0” (9.7)
26’ 5” (8.1)	31’ 0” (9.4)
23’ 0” (7.0)	26’ 7” (8.1)
23’ 0” (7.0)	25’ 7” (7.8)
7’ 5” (2.26)	7’ 5” (2.26)
6’ 7” (2.01)	6’ 7” (2.01)
16.2 (411)	16.2 (411)

Weights**


Operating weight

Discbine® 313	Discbine® 316
6,275 (2846)	6,700 (3039)

Standard Optional – Not Available
*Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
**Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.