488 Cutting Width9 ft., 3 in.Conditioning Roll Length102 in.Min. Tractor Requirement35 hp Standard Optional 488 AugerAugerNAFloating range, in. (mm)NASpeed, rpmNAConditionerConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustmentRoll length (crushing area), in. (mm)102 (2591)Roll diameter, in. (mm)10-3/8 (264)DrivesIndividual, #50 roller chainSpeed, rpm637Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)Roll gap adjustmentShimsMaterial discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths 38 and 96 (965 and 2438)CutterbarCutterbarOne assemblyKnivesBolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sicklesGuardsTwin, forged steel, double-hardened hold-downsCutting height, in. (mm)1.25 to 4.25 (32 to 108)Cutting angle, degrees-7 or -10Hydraulic tiltNAGuard points max lift, in. (mm)19 (483)Skid shoes2Sickle drivewobble jointSickle speed, spm1632Sickle stroke, in. (mm)3 (76)Cutting WidthCutting Width, ft. in. (mm)9'3" (2819)DimensionsOverall width, operating, ft. in. (mm)13'8-1/4" (4172)Overall width, transport, ft. in. (mm)12'2" (3708)Overall length, transport, ft. in. (mm)13'4" (4064)Overall height, operating, ft. in. (mm)3'6" (1067)Overall height, raised, ft. in. (mm)5'7" (1702)DriveDrive540 rpm PTOHydraulic CylindersHydraulic CylindersOptional header lift, Rope controlMinimum Tractor ReqMinimum Tractor Req35-hp (26.1 kw) One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)Operating SpeedOperating Speed, mph (kph)up to 8 (13)Max safe transport speed, mph (kph)25 (40)ReelReel4-tine barPeripheral speed, mph (kph)6.5 to 8.6 (10.5 to 13.8)Speed AdjustmentVariable sheaveDiameter (maximum), ft. in. (mm)3'6-1/4" (1073)AdjustmentsFore/aft, vertical, pitchDriveBelt and chainBushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locationsTiresTires27 x 9.50-15 flotationTractor HookupTractor HookupEqual-angle PTOWeightWeight, lbs. (kg)2763 (1253)