पुल-टाइप फोरेज हार्वेस्टर

METALERT® III SYSTEM PROTECTS EQUIPMENT AND CATTLE

Broken rake tines, sickle sections, lost hitch pins and other metal objects can turn up in the cleanest fields. Large pieces can cause costly cutterhead damage. And, if metal ends up in livestock feed, it can harm your valuable herd.

5-YEAR CUTTERHEAD PROTECTION PLAN

For the finest protection available, make sure your New Holland forage harvester is equipped with the Metalert® III electronic metal detector. It delivers peace of mind and a five-year cutterhead protection plan that pays for all parts and labor to repair any damaged part resulting from ferrous metal entering the cutterhead. The Metalert III microcomputer also provides on-board diagnostic capabilities.

FEEDROLLS STOP WITHIN 1/20 OF A SECOND

New Holland’s 30 years of experience with metal detectors has lead to the Metalert® III system. Here’s how it works. A magnet and sensor are housed in the lower front feedroll. The magnet emits a constant magnetic field between the two front stainless steel feedrolls. When a stray piece of iron or steel enters the feedrolls, a signal is sent to a solenoid located above the upper feedroll. The solenoid releases a spring pawl into the ratchet wheel, stopping the feedrolls. At the same time, it shuts off power to an electric clutch on the reversing gearbox, which shifts to neutral and stops power to the feedroll drive. All within 1/20 of a second!

IN-CAB ALERT SYSTEM

A built-in alarm light and horn alert you when metal is detected. Simply back the material out of the feedrolls with this feedroll control switch. Metalert III automatically resets when the metal has been removed.

CHOP AND PROCESS CORN SILAGE IN ONE OPERATION

Improve your corn silage feed efficiency with New Holland’s optional onboard CropPro™ crop processor.

BETTER DIGESTIBILITY, INCREASED MILK PRODUCTION

Factory installed between the cutterhead and blower, the CropPro crop processor shears cobs and stems, and cracks and crushes kernels, producing silage that is higher in effective fiber and easier for your herd to digest. That means higher milk production without buying additional feed or supplements, and without the expense and process time of a stationary roller mill. A single baffle is easy to remove to quickly change from corn silage to haylage.

SEGMENTED CROPPRO™ ROLLS

CropPro rolls are segmented, allowing them to be rebuilt at a lower cost than one-piece rolls.