ROLABAR® RAKES

Rake an 8-foot, 6-inch strip with the Model 57, which is PTO-driven. The main frame is made of 3-inch channel steel. A total of 90 tines, mounted on five tine bars, follow ground contours closely to get every bit of hay. Tine bar bearings can be replaced quickly, without removing the tine bar from the rake.

Offset wheels on the Rolabar® rakes are set close to the basket, so the tines closely follow the ground contours for cleaner raking. Height-adjustment cranks permit easy raising or lowering of either side of the basket for ideal ground clearance. Crank arm locks prevent arms from changing position over rough terrain.

Large commercial operations will appreciate the clean, high-capacity raking performance of the Rolabar® 230 twin basket rake. Using two 12-foot baskets, the Rolabar 230 rakes up to 30 feet of crop into one tidy windrow. It’s ideal for raking the swaths produced by self-propelled windrowers with heads up to 19 feet wide and wide, center-pivot mower-conditioners.

For the ultimate in hay raking, the Model 216 unitized rake joins two 10 1/2-foot baskets on one heavy-duty frame to cover twice the ground in one pass. It can combine two 16-foot windrows, to cover a 27-foot-wide stretch each trip down the field.

Cut man hours, fuel consumption and tractor time in half, while doubling your raking productivity with the Model 252 pivot-tongue rake hitch. It lets you configure two Rolabar® rakes to take two separate windrows or make one giant windrow.