COMPACT WHEEL LOADERS Construction

Features

Low total cost of ownership

Series models feature an advanced 3.4 liter, 4-cylinder with waste gate for optimum turbo pressure stability.

High versatility

The choice of one or two auxiliary hydraulic circuits and the availability of high flow in combination with creep speed allows work to be done at max flow at a constantly low forward pace.

Superior performance

The weight distribution enables the new compact wheel loader to fully benefit from its impressive improved lifting capacity.

High precision

The new Inch & Brake pedal progressively disengages the transmission in the decelerating phase while progressively engaging the brakes, giving the operator millimetric control of the machine at low speeds.

Gallery

MODELS

New Holland W50C Z-BAR

Max. engine power - ISO14396 [kW/hp(CV)]43/58
TransmissionHydrostatic 4-wheel drive
Payload @80% (tonnes)1.9
Max. bucket height (m)3.14


Standard  Optional 
New Holland W50C Z-BAR
Engine*
Engine*F5H
No. of cyl. / Aspiration / Valves / Emission level Tier-Stage4 / T / 2 / 4B-4
Capacity (cm³)3400
Bore and stroke (mm)99x110
Max. engine power - ISO14396 [kW/hp(CV)]43/58
Max. torque ISO TR14396 @2500 rpm (Nm)245
Service interval (Hrs)500
Fuel tank capacity (l)87
Electrical system
Voltage (V)12
Battery / Alternator (Ah)95 / 120
Cab
Max. noise level [dB(A)]71
Vision (degrees)360
Tilting & telescopic steering wheel
F-N-R integrated on joystick
Hydraulics system
Type of pumpGear pump for loading and steering hydraulics
Standard / High flow (@ 2500rpm) (lpm)67 / –
Transmission
TypeHydrostatic 4-wheel drive
Operating speed range (km/h)0-5
Travel speed range (km/h)0-20
Optional high travel speed (km/h)–
“Inch & Brake” Pedal
Creeper–
Differential lock
Limited slip diff front & rear
Open diff front & rear
Open diff with 100% lock on front & rear–
Specifications with forks
Tipping load straight (tonnes)2.8
Tipping load at full turn @40° (tonnes)2.4
Payload @80% (tonnes)1.9
Operating weight (kg)5020
Max. overall height (m)3.48
Hinge pin height (m)3.14
Max. fork height (m)2.90
Forks height @ max. reach (m)1.27
Reach @ ground level (m)0.94
Max. reach (m)1.35
Reach @ max. heigh (m)0.59
Specifications with bucket
Bucket volume (SAE) (m3)0.7-1.0
Breakout force (kgF)6042
Length with bucket (m)5.28
Max. bucket height (m)3.14
Hinge pin height (m)3.14
Dump height @45° (m)2.49
Dig depth (mm)730
Reach at full height (mm)770
Dimensions
Height (mm)2460
Ground clearance (mm)450
Rear axle width (m)1.74
Implement width (m)1.90
Wheelbase (m)2.08
Turning radius (m)3.72

New Holland W50C TC

Max. engine power - ISO14396 [kW/hp(CV)]43/58
TransmissionHydrostatic 4-wheel drive
Payload @80% (tonnes)2.1
Max. bucket height (m)3.94


Standard  Optional 
New Holland W50C TC
Engine*
Engine*F5H
No. of cyl. / Aspiration / Valves / Emission level Tier-Stage4 / T / 2 / 4B-4
Capacity (cm³)3400
Bore and stroke (mm)99x110
Max. engine power - ISO14396 [kW/hp(CV)]43/58
Max. torque ISO TR14396 @2500 rpm (Nm)245
Service interval (Hrs)500
Fuel tank capacity (l)87
Electrical system
Voltage (V)12
Battery / Alternator (Ah)95 / 120
Cab
Max. noise level [dB(A)]71
Vision (degrees)360
Tilting & telescopic steering wheel
F-N-R integrated on joystick
Hydraulics system
Type of pumpGear pump for loading and steering hydraulics
Standard / High flow (@ 2500rpm) (lpm)67 / –
Transmission
TypeHydrostatic 4-wheel drive
Operating speed range (km/h)0-5
Travel speed range (km/h)0-20
Optional high travel speed (km/h)–
“Inch & Brake” Pedal
Creeper–
Differential lock
Limited slip diff front & rear
Open diff front & rear
Open diff with 100% lock on front & rear–
Specifications with forks
Tipping load straight (tonnes)3.0
Tipping load at full turn @40° (tonnes)2.6
Payload @80% (tonnes)2.1
Operating weight (kg)4910
Max. overall height (m)3.63
Hinge pin height (m)3.11
Max. fork height (m)2.96
Forks height @ max. reach (m)1.34
Reach @ ground level (m)0.77
Max. reach (m)1.26
Reach @ max. heigh (m)0.46
Specifications with bucket
Bucket volume (SAE) (m3)0.7-1.0
Breakout force (kgF)4104
Length with bucket (m)5.23
Max. bucket height (m)3.94
Hinge pin height (m)3.11
Dump height @45° (m)2.34
Dig depth (mm)130
Reach at full height (mm)710
Dimensions
Height (mm)2460
Ground clearance (mm)450
Rear axle width (m)1.74
Implement width (m)1.90
Wheelbase (m)2.08
Turning radius (m)3.72

New Holland W60C Z-BAR

Max. engine power - ISO14396 [kW/hp(CV)]48/64
TransmissionHydrostatic 4-wheel drive
Payload @80% (tonnes)2.1
Max. bucket height (m)3.18


Standard  Optional 
New Holland W60C Z-BAR
Engine*
Engine*F5H
No. of cyl. / Aspiration / Valves / Emission level Tier-Stage4 / T / 2 / 4B-4
Capacity (cm³)3400
Bore and stroke (mm)99x110
Max. engine power - ISO14396 [kW/hp(CV)]48/64
Max. torque ISO TR14396 @2500 rpm (Nm)261
Service interval (Hrs)500
Fuel tank capacity (l)87
Electrical system
Voltage (V)12
Battery / Alternator (Ah)95 / 120
Cab
Max. noise level [dB(A)]71
Vision (degrees)360
Tilting & telescopic steering wheel
F-N-R integrated on joystick
Hydraulics system
Type of pumpGear pump for loading and steering hydraulics
Standard / High flow (@ 2500rpm) (lpm)67 / –
Transmission
TypeHydrostatic 4-wheel drive
Operating speed range (km/h)0-5
Travel speed range (km/h)0-20
Optional high travel speed (km/h)–
“Inch & Brake” Pedal
Creeper
Differential lock
Limited slip diff front & rear
Open diff front & rear–
Open diff with 100% lock on front & rear–
Specifications with forks
Tipping load straight (tonnes)3.0
Tipping load at full turn @40° (tonnes)2.6
Payload @80% (tonnes)2.1
Operating weight (kg)5160
Max. overall height (m)3.53
Hinge pin height (m)3.18
Max. fork height (m)2.95
Forks height @ max. reach (m)1.27
Reach @ ground level (m)1.01
Max. reach (m)1.41
Reach @ max. heigh (m)0.63
Specifications with bucket
Bucket volume (SAE) (m3)0.8-1.1
Breakout force (kgF)5481
Length with bucket (m)5.39
Max. bucket height (m)3.18
Hinge pin height (m)3.18
Dump height @45° (m)2.52
Dig depth (mm)120
Reach at full height (mm)830
Dimensions
Height (mm)2460
Ground clearance (mm)450
Rear axle width (m)1.74
Implement width (m)2.05
Wheelbase (m)2.08
Turning radius (m)3.72

New Holland W60C TC

Max. engine power - ISO14396 [kW/hp(CV)]48/64
TransmissionHydrostatic 4-wheel drive
Payload @80% (tonnes)2.2
Max. bucket height (m)4.09


Standard  Optional 
New Holland W60C TC
Engine*
Engine*F5H
No. of cyl. / Aspiration / Valves / Emission level Tier-Stage4 / T / 2 / 4B-4
Capacity (cm³)3400
Bore and stroke (mm)99x110
Max. engine power - ISO14396 [kW/hp(CV)]48/64
Max. torque ISO TR14396 @2500 rpm (Nm)261
Service interval (Hrs)500
Fuel tank capacity (l)87
Electrical system
Voltage (V)12
Battery / Alternator (Ah)95 / 120
Cab
Max. noise level [dB(A)]71
Vision (degrees)360
Tilting & telescopic steering wheel
F-N-R integrated on joystick
Hydraulics system
Type of pumpGear pump for loading and steering hydraulics
Standard / High flow (@ 2500rpm) (lpm)
Transmission
TypeHydrostatic 4-wheel drive
Operating speed range (km/h)0-5
Travel speed range (km/h)0-20
Optional high travel speed (km/h)–
“Inch & Brake” Pedal
Creeper
Differential lock
Limited slip diff front & rear
Open diff front & rear–
Open diff with 100% lock on front & rear–
Specifications with forks
Tipping load straight (tonnes)3.2
Tipping load at full turn @40° (tonnes)2.8
Payload @80% (tonnes)2.2
Operating weight (kg)4940
Max. overall height (m)3.65
Hinge pin height (m)3.13
Max. fork height (m)2.97
Forks height @ max. reach (m)1.34
Reach @ ground level (m)0.80
Max. reach (m)1.27
Reach @ max. heigh (m)0.47
Specifications with bucket
Bucket volume (SAE) (m3)0.8-1.1
Breakout force (kgF)3925
Length with bucket (m)5.33
Max. bucket height (m)4.09
Hinge pin height (m)3.13
Dump height @45° (m)2.35
Dig depth (mm)140
Reach at full height (mm)740
Dimensions
Height (mm)2460
Ground clearance (mm)450
Rear axle width (m)1.74
Implement width (m)2.05
Wheelbase (m)2.08
Turning radius (m)3.72

New Holland W70C

Max. engine power - ISO14396 [kW/hp(CV)]55/75
TransmissionHydrostatic 4-wheel drive
Payload @80% (tonnes)2.2
Max. bucket height (m)3.29


Standard  Optional 
New Holland W70C
Engine*
Engine*F5H
No. of cyl. / Aspiration / Valves / Emission level Tier-Stage4 / T / 2 / 4B-4
Capacity (cm³)3400
Bore and stroke (mm)99x110
Max. engine power - ISO14396 [kW/hp(CV)]55/75
Max. torque ISO TR14396 @2500 rpm (Nm)316
Service interval (Hrs)500
Fuel tank capacity (l)87
Electrical system
Voltage (V)12
Battery / Alternator (Ah)95 / 120
Cab
Max. noise level [dB(A)]72
Vision (degrees)360
Tilting & telescopic steering wheel
F-N-R integrated on joystick
Hydraulics system
Type of pumpGear pump for loading and steering hydraulics
Standard / High flow (@ 2500rpm) (lpm)85 / 130
Transmission
TypeHydrostatic 4-wheel drive
Operating speed range (km/h)0-5
Travel speed range (km/h)0-20
Optional high travel speed (km/h)33
“Inch & Brake” Pedal
Creeper
Differential lock
Limited slip diff front & rear
Open diff front & rear–
Open diff with 100% lock on front & rear
Specifications with forks
Tipping load straight (tonnes)3.1
Tipping load at full turn @40° (tonnes)2.7
Payload @80% (tonnes)2.2
Operating weight (kg)5559
Max. overall height (m)3.63
Hinge pin height (m)3.29
Max. fork height (m)3.08
Forks height @ max. reach (m)1.34
Reach @ ground level (m)0.99
Max. reach (m)1.43
Reach @ max. heigh (m)0.61
Specifications with bucket
Bucket volume (SAE) (m3)0.9-1.2
Breakout force (kgF)6393
Length with bucket (m)5.62
Max. bucket height (m)3.29
Hinge pin height (m)3.29
Dump height @45° (m)2.60
Dig depth (mm)100
Reach at full height (mm)850
Dimensions
Height (mm)2600
Ground clearance (mm)440
Rear axle width (m)1.80
Implement width (m)2.05
Wheelbase (m)2.22
Turning radius (m)3.99

New Holland W80C

Max. engine power - ISO14396 [kW/hp(CV)]55/75
TransmissionHydrostatic 4-wheel drive
Payload @80% (tonnes)2.5
Max. bucket height (m)3.40


Standard  Optional 
New Holland W80C
Engine*
Engine*F5H
No. of cyl. / Aspiration / Valves / Emission level Tier-Stage4 / T / 2 / 4B-4
Capacity (cm³)3400
Bore and stroke (mm)99x110
Max. engine power - ISO14396 [kW/hp(CV)]55/75
Max. torque ISO TR14396 @2500 rpm (Nm)316
Service interval (Hrs)500
Fuel tank capacity (l)87
Electrical system
Voltage (V)12
Battery / Alternator (Ah)95 / 120
Cab
Max. noise level [dB(A)]72
Vision (degrees)360
Tilting & telescopic steering wheel
F-N-R integrated on joystick
Hydraulics system
Type of pumpGear pump for loading and steering hydraulics
Standard / High flow (@ 2500rpm) (lpm)85 / 130
Transmission
TypeHydrostatic 4-wheel drive
Operating speed range (km/h)0-5
Travel speed range (km/h)0-20
Optional high travel speed (km/h)33
“Inch & Brake” Pedal
Creeper
Differential lock
Limited slip diff front & rear
Open diff front & rear–
Open diff with 100% lock on front & rear
Specifications with forks
Tipping load straight (tonnes)3.6
Tipping load at full turn @40° (tonnes)3.0
Payload @80% (tonnes)2.5
Operating weight (kg)5910
Max. overall height (m)3.73
Hinge pin height (m)3.40
Max. fork height (m)3.19
Forks height @ max. reach (m)1.39
Reach @ ground level (m)0.99
Max. reach (m)1.43
Reach @ max. heigh (m)0.61
Specifications with bucket
Bucket volume (SAE) (m3)1.0-1.3
Breakout force (kgF)6317
Length with bucket (m)5.68
Max. bucket height (m)3.40
Hinge pin height (m)3.40
Dump height @45° (m)2.69
Dig depth (mm)840
Reach at full height (mm)850
Dimensions
Height (mm)2680
Ground clearance (mm)490
Rear axle width (m)1.86
Implement width (m)2.10
Wheelbase (m)2.23
Turning radius (m)3.99
Back

Standard Optional – Not available
* Developed by FPT Industrial
Top Service:
Twitter: @NHTopService


New Holland Agriculture a brand of CNH Industrial ©
back to top