TRAILED MOWERS Hay & Forage equipment

Features

DiscCutter™ L Lateral and DiscCutter™ C

Two models of trailed disc mower are available. The off-set lateral DiscCutter™ L models, available with a 3.11 meter working width, whereas the center pull DiscCutter™ C models are available in 3.11 and 3.52 meter working widths.

State-of-the-art manufacturing

Following key manufacturing principles, rigorous manufacturing and quality standards are upheld by a committed workforce, to deliver outstanding quality, durability and reliability.

A history of excellence

The New Holland brand has become synonymous with hay and forage excellence, an unbroken bloodline which stretches back more than a century.

Gallery

DETAILS

Durable cutterbar technology

The cutterbar is really at the heart of the mower. All models benefit from the cutterbar’s low profile design, which has a perfectly smooth underside and a large bearing surface which guarantees low ground pressure, thereby protecting both the field and the crop during mowing for quicker regrowth. Furthermore, the low profile design means that the crop can be cut to a 40mm stubble height, harvesting more of your crop.


Read More

Ease of use

The cutterbar’s twisted blades can be quickly and easily changed with a dedicated tool. Servicing is easy too, thanks to ‘on top’ serviceability. The bearing hubs can be easily and quickly dismounted for rapid servicing access.


Read More

A choice of conditioners

Customers can choose from three different conditioner configurations
• PE Finger available on all models – these flexible Polyethylene fingers are highly flexible, light and require minimal maintenance. Ideal for those producing cattle fodder, if a finger is lost in the crop it will not harm livestock or a forage harvester.
• Steel Flail available on DicsCutter L and DiscCutter C Models – durable and strong, the steel flail conditioner is ideal when working in stony or sandy ground, as it will resist stone shocks and has been design to withstand extreme wear.
• Rubber roller available on DicsCutter L and DiscCutter C Models – has been designed with delicate crops in mind, such as alfalfa and clover. Thanks to the gentle conditioning action, fodder value is maintained.


Read More

Tailored conditioning

Dependent on the crop, its moisture content and ultimate usage, the degree of conditioning can be quickly and easily adjusted from one single handle.


Read More

Ideal swath formation

Thanks to the higher driving speeds, made possible by the 85% conditioning width, better shaped swaths are formed, leading to more efficient overall operation – ideal when the mower is being directly followed by a baler or forage harvester.


Read More

TopDry™ feature

This impressive feature, available on DiscCutter™, DiscCutter™ L and DiscCutter™ C models fitted with PE fingers or Steel Flail conditioners, enables the wide spreading of crop – over 85% of the cutting width. It delivers a higher degree of conditioning, by actively forcing the crop into the conditioner. The wider swath exposes more of the crop to the air to minimise drying time – ideal when working unsuitable weather conditions. The degree of top drying can be adjusted with one handle.


Read More

Productive gearbox technology

The 360° gearbox has been designed to deliver tight turning performance on headlands and can turn through a full 90° circumference to draw bar, without causing any vibrations.


Read More

Topsafe™ system

When working in stony ground, the TopSafe™ feature delivers outstanding performance. If the mower comes into contact with a stone or a protruding obstacle, the cutterbar is automatically lifted over the obstacle to avoid a potentially damaging collision. As a result, damage is reduced and machine life is increased. The sensitivity of this system is controlled by adjusting two springs with a dedicated tool. This enables the mower to glide freely across the ground, no matter its undulations, as well as delivering uniform stubble height and encouraging regrowth. This system does not impact on the ground pressure system.


Read More

A multitude of features

The entire DiscCutter™ L & DiscCutter™ C trailed mower range benefits from disc cutterbar technology, the TopDry™ system as well as different types of conditioner; choose between PE finger, steel flail and rubber chevron rollers to suit your operation.


Read More

Two passes in one

The optional DuraMerger™ system is perfect for double swathing applications. This system enables you to lay double swaths which makes subsequent operations more efficient with fewer infield passes, increasing daily throughput.


Read More

Productivity boosting central drawbar

The central drawbar concept enables fields to be mowed from either the right or left-hand side ensuring the entire width of the mower is always used. Furthermore, it prevents any tapering, therefore, when directly baling or foraging, in-field passes are maximised. In fact, in-field capacity can be 15% higher because working the field from one side will shorten headland turning time and increase mowing productivity.


Read More

Easy adjustment

To ensure quick and easy adjustment, the following parameters can all be adjusted by using just one tool
• TopSafe™ system
• Ground pressure
• Stubble height
• Degree of conditioning


Read More

Lower ground pressure

In order to protect the crop and to facilitate regrowth, the DiscCutter™ C & DiscCutter™ L Range has been designed for compatibility with large flotation tyres to minimise ground compaction.


Read More

Ease of operation

A range of features have been included to make operation even easier and include
• A solid parking jack for easy hitching and unhitching.
• High ground clearance, ideal when working with heavy and voluminous swaths.
• Hydraulic engagement of transport position.


Read More
Top Service:
Twitter: @NHTopService


New Holland Agriculture a brand of CNH Industrial ©
back to top