| Overall operating height with foundry/excavating bucket short lip, in (mm) |
| Overall operating height with low profile/standard lip bucket, in (mm) |
| Overall operating height with low profile extended/long lip bucket, in (mm) |
| Height to Bucket hinge pin, in (mm) |
| Height to Top of ROPS, in (mm) |
| Height to Bottom of level bucket, fully raised, in (mm) |
| Overall length without attachment with coupler, in (mm) |
| Overall length with foundry excavation bucket on ground, in (mm) |
| Overall length with low profile bucket, in (mm) |
| Overall length with low profile extended bucket, in (mm) |
| Dump angle, degrees |
| Dump height with foundry/excavating bucket short lip, in (mm). |
| Dump height with low profile/standard lip bucket, in (mm). |
| Dump reach (max height), in (mm) |
| Maximum attachment rollback - Bucket on ground, degrees |
| Maximum attachment rollback - Bucket at full height, degrees |
| Wheelbase, in (mm) |
| Ground clearance (bottom of belly pan), in (mm) |
| Angle of departure, degrees |
| Clearance circle without bucket, in (mm) |
| Clearance circle with 60” inch foundry bucket in carry position, in (mm) |
| Clearance circle with 60” inch low profile bucket on ground, in (mm) |
| Clearance circle with 60” inch extended low profile on ground, in (mm) |
| Clearance circle with foundry bucket in carry position, in (mm) |
| Clearance circle with low profile bucket on ground, in (mm) |
| Clearance circle with extended low profile on ground, in (mm) |
| Clearance circle rear, in (mm) |
| Rear axle to bumper, in (mm) |
| Tread width, in (mm) |
| Overall width, in (mm) |