COMPACT TRACK LOADERS

Gallery

TECHNICAL SPECIFICATIONS

Standard Optional
Overall operating height
 
Overall operating height with foundry/excavating bucket short lip in (mm)
Overall operating height with low profile/standard lip bucket in (mm)
Overall operating height with low profile extended/long lip bucket in (mm)
Height to
 
Bucket hinge pin in (mm)
Top of ROPS in (mm)
Bottom of level bucket, fully raised in (mm)
Overall length
 
Overall length without attachment with coupler in (mm)
Overall length with foundry excavation bucket on ground in (mm)
Overall length with low profile bucket in (mm)
Overall length with low profile extended bucket in (mm)
Dump
 
Dump angle degrees
Dump height with foundry/excavating bucket short lip in (mm)
Dump height with low profile/standard lip bucket in (mm)
Dump reach (max height) in (mm)
Maximum attachment rollback
 
Bucket on ground degrees
Bucket at full height degrees
Track and clearance
 
Track on ground in (mm)
Ground clearance (bottom of belly pan) in (mm)
Angle of departure degrees
Clearance circle
 
Clearance circle without bucket in (mm)
Clearance circle with foundry bucket in carry position in (mm)
Clearance circle with low profile bucket on ground in (mm)
Clearance circle with extended low profile on ground in (mm)
Clearance circle rear in (mm)
Track guage in (mm)
Overall width in (mm)
Engine
 
Manufacturer/model
Type
Cylinder
Bore/stroke in (mm)
Displacement in3 (L)
Fuel injection
Fuel
Fuel filter
Air intake
Cooling
Engine speeds
 
High idle - no load rpm
Rated - full load rpm
Low idle rpm
Horsepower per SAE J1349
 
Gross hp (kW)
Net hp (kW)
Peak torque lb-ft (N•m)
Drive pump electro hydraulic
 
Pump to engine ratio
Displacement in3 (cc)
Flow gpm (Lpm)
Charge pressure psi (bar)
System relief psi (bar)
Control
Drive motors
 
Effective Max displacement in3 (cc)
Effective Displacement opt high speed in3 (cc)
Speed @ high idle engine rpm
Speed @ optional high speed rpm
Torque @ max displ. and relief pressure lb-ft (N•m)
Travel speed
 
Low range mph (km/h)
High range
Final drive
Parking brake
 
Type
Engagement
Undercarriage
 
System
Idlers / rollers per side
Ground pressure
 
PSI (with spec belt)
Pumps
 
Type
Displacement standard aux. in3 (cc)
Displacement high flow aux. in3 (cc)
Standard pump flow gpm (Lpm)
Optional high flow gpm (Lpm)
Enhanced high flow gpm (Lpm)
Loader control valve
 
Type
Standard relief pressure psi (bar)
Enhanced high flow relief pressure psi (bar)
Hydraulic filter
Lift cylinder
 
Bore diameter in (mm)
Rod diameter, in (mm) in (mm)
Stroke in, in (mm) in (mm)
Closed length, in (mm) in (mm)
Bucket cylinders
 
Bore diameter, in (mm) in (mm)
Rod diameter, in (mm) in (mm)
Stroke, in (mm) in (mm)
Closed length, in (mm) in (mm)
Rated operating load
 
50% tip lbs (kg)
35% tip lbs (kg)
Tipping load lbs (kg)
Breakout forces
 
Lift cylinder lbs (kN)
Bucket cylinder lbs (kN)
Cycle times
 
Raise sec
Lower sec
Dump sec
Roll back sec
Weights
 
Operating weight lbs (kg)
Shipping weight lbs (kg)
Service Capacities
 
Fuel tank, gal (L)
Engine oil with filter, qt (L)
System Capacity with filter, qt (L)
DEF tank, gal (L)
Lift Style
 
Lift design

– Not applicable
* 50% of tipping load
** max values, according priority to flow or pressure
Top Service:


New Holland Agriculture a brand of CNH Industrial ©
back to top