DISCBINE® DISC MOWER-CONDITIONERS

Discbine® 313

Cutting width ft. in. (m)	13’ 0” (4.0)
Number of discs	8
Conditioner roll tension adjustment	Single crank
Tongue Options	Center pivot straight hitch

Discbine® 313
Standard Optional
Cutterbar
Cutting width ft. in. (m)	13’ 0” (4.0)
Cutterbar model	MowMax™ II with ShockPRO™ hubs
Type	Modular
Number of discs	8
Knives per disc	2
Disc speed @ 1,000 rpm PTO speed rpm	2,250
Tilt angle degrees	2-10
Flotation	Vertical and lateral, adjustable springs
Drive method	PTO drive w/slip clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm)	0.79-2.7 (20-69)
Cutting height w/ opt. high-stubble shoes in. (mm)	3.1-5.5 (79-140)
Cutting height w/ opt. Biomass shoes in. (mm)	4.9-7.8 (124-198)
Cutting height w/ opt. adjustable shoes in. (mm)	0.79-5.8 (20-147)
Roll Conditioners
Type	Chevron intermeshing rubber or steel rolls
Length in. (mm)	125 (3175)
Diameter in. (mm)	10.4 (264)
Drive method	4 HB V-belt and enclosed gears
Speed rpm	750 or 640
Conditioner roll tension adjustment	Single crank
Conditioner gap adjustment	Adjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
Type	Flail rotor with 120 tapered flails
Length in. (mm)	125 (3175)
Diameter in. (mm)	22 (560)
Drive method	4 HB v-belt
Speed rpm	1042 std. 752 opt.
Conditioner gap adjustment	Single crank adjustable rotor hood
Crop Discharge
Swath width ft. (m)	10 (3.0)
Windrow width ft. (m)	3-8 (0.9-2.4)
Driveline
Input speed rpm	1000
Driveline protection	Slip clutch and overrunning clutch assembly at rear of PTO shaft
Tongue Options
Type	Center pivot straight hitch
Hitch type	Drawbar swivel or 2-point swivel
Tractor Requirements
Minimum PTO power required hp (kW)	90 (67)
Hydraulic circuits required	2
Minimum relief pressure required psi (bar)	1,500 (103)
Drawbar	ASAE Category II or III
3 pt hitch (swivel models)	Category III
Electrical	7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tires	12.5L x 15 8PR
Transport Speed
Max road speed mph (kph)	20 (32)
Dimensions*
Width-transport ft. in. (m)	13’ 4” (4.04)
Width-operating (2 pt swivel hitch) ft. in. (m)	21’ 3” (6.5)
Width-operating (drawbar swivel hitch)	19’ 7” (6.0)
Length-transport (2 pt swivel hitch) ft. in. (m)	27’ 5” (8.4)
Length-transport (drawbar swivel hitch)	26’ 5” (8.1)
Length-operating (2pt swivel hitch) ft. in. (m)	23’ 0” (7.0)
Length-operating (drawbar swivel hitch)	22’ 0” (6.7)
Height-transport ft. in. (m)	7’ 5” (2.26)
Height-operating	6’ 7” (2.01)
Ground clearance with head fully raised in. (mm)	16.2 (411)
Weights**
Operating weight	6,275 (2846)

Discbine® 316

Cutting width ft. in. (m)	16’ 3” (4.95)
Number of discs	10
Conditioner roll tension adjustment	Single crank
Tongue Options	Center pivot straight hitch

Discbine® 316
Standard Optional
Cutterbar
Cutting width ft. in. (m)	16’ 3” (4.95)
Cutterbar model	MowMax™ II with ShockPRO™ hubs
Type	Modular
Number of discs	10
Knives per disc	2
Disc speed @ 1,000 rpm PTO speed rpm	2,250
Tilt angle degrees	2-10
Flotation	Vertical and lateral, adjustable springs
Drive method	PTO drive w/slip clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm)	0.79-2.7 (20-69)
Cutting height w/ opt. high-stubble shoes in. (mm)	3.1-5.5 (79-140)
Cutting height w/ opt. Biomass shoes in. (mm)	4.9-7.8 (124-198)
Cutting height w/ opt. adjustable shoes in. (mm)	0.79-5.8 (20-147)
Roll Conditioners
Type	Chevron intermeshing rubber or steel rolls
Length in. (mm)	125 (3175)
Diameter in. (mm)	10.4 (264)
Drive method	4 HB V-belt and enclosed gears
Speed rpm	750 or 640
Conditioner roll tension adjustment	Single crank
Conditioner gap adjustment	Adjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
Type	–
Length in. (mm)	–
Diameter in. (mm)	–
Drive method	–
Speed rpm	–
Conditioner gap adjustment	–
Crop Discharge
Swath width ft. (m)	10 (3.0)
Windrow width ft. (m)	3-8 (0.9-2.4)
Driveline
Input speed rpm	1000
Driveline protection	Slip clutch and overrunning clutch assembly at rear of PTO shaft
Tongue Options
Type	Center pivot straight hitch
Hitch type	Drawbar swivel or 2-point swivel
Tractor Requirements
Minimum PTO power required hp (kW)	100 (75)
Hydraulic circuits required	2
Minimum relief pressure required psi (bar)	1,500 (103)
Drawbar	ASAE Category III
3 pt hitch (swivel models)	Category III
Electrical	7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tires	12.5L x 15 8PR
Transport Speed
Max road speed mph (kph)	20 (32)
Dimensions*
Width-transport ft. in. (m)	16’ 7” (5.05)
Width-operating (2 pt swivel hitch) ft. in. (m)	25’ 7” (7.8)
Width-operating (drawbar swivel hitch)	23’ 11” (7.3)
Length-transport (2 pt swivel hitch) ft. in. (m)	32’ 0” (9.7)
Length-transport (drawbar swivel hitch)	31’ 0” (9.4)
Length-operating (2pt swivel hitch) ft. in. (m)	26’ 7” (8.1)
Length-operating (drawbar swivel hitch)	25’ 7” (7.8)
Height-transport ft. in. (m)	7’ 5” (2.26)
Height-operating	6’ 7” (2.01)
Ground clearance with head fully raised in. (mm)	16.2 (411)
Weights**
Operating weight	6,700 (3039)

Features

A cut above the rest: MowMax™ II cutterbars

Faster drying with Wide-Dry™ conditioning

Fast, simple adjustment, easy serviceability

Gallery

Models

Discbine® 313

Discbine® 316