Ready for modern demands

With a lift capacity of up to 10,927kg, a T8 series tractor has the rear linkage capacity to cope with the heaviest of rear attachments. Of equal importance, high capacity hydraulics have the power to raise the linkage quickly for a speedy headland turn. With HTS, you can set the linkage raise and lower positions as part of an automated turn sequence.

MEGA FLOW™ pump

Standard hydraulic flow is a generous 157 litres per minute. With an additional MegaFlow™ pump, capacity climbs to a massive 279 litres per minute*. With engine power management, full hydraulic capacity can be exploited in demanding conditions, with up to 71hp(cv) of extra power available.
* Ultra Command™ models

Flow control using the IntelliView monitor

The IntelliView™ iv touchscreen monitor makes setting flow rates to individual valves simple. Scroll through the menus and select valve control. Choose the outlet you wish to adjust, and drag the slider with your finger to the desired setting. Job done.

Up to 6 electronic remotes

T8 remote valves are easy to identify with colour coded couplers and levers. All six remotes can be controlled without moving away from the SideWinder™ II armrest, allowing you to identify and work each remote with exact precision. Four finger tip remote levers are centrally located on the armrest, and two valves are controlled either using the two additional paddles located to the right of the IntelliView™ monitor, or by using the CommandGrip handle. Alternatively, a joystick can be mounted in place of the fifth and sixth paddles. Flow, timing and detent settings can be set to precisely match the job. Each valve can also be programmed into the Headland Turn Sequencing system.

PTO

A front mounted 1000rpm PTO is available, whilst at the rear,either a 540/1000rpm shaft or a heavy duty 20 spline 1000rpm shaft is offered. PTO management is integrated into the HTS system.