Discbine® 310 PLUS Cutting Width, ft. in. (m)10’ 1” (3.0)Transport Width, ft. in. (m)10’ 4” (3.2)Number of Discs6Minimum PTO HP requirement80 Standard Optional Discbine® 310 PLUS CutterbarTypeMowMax™ II PLUS true modular cutterbarCutting width, ft. in. (cm)10’ 1” (3.0)Cutting height, in. (mm)0.5 – 2.6 (12 – 65)Cutting height w/ opt. adjustable shoes, in. (mm)0.5 – 5.6 (12 – 143)Number of discs/knives per disc6/2Maximum disc speed @ 1,000 rpm PTO2250Hydraulic tilt/cutting height controlTilt angle, degrees-2° to -10°Header flotationVertical & lateral, adjustable springsShockPRO™ disc drive protection system3-year factory cutterbar warrantyRoll Conditioning SystemsChevron intermeshing rubber rollsChevron intermeshing steel rolls–Length, in. (mm)90 (2286)Diameter, in. (mm)10.4 (264)Drive methodBelt-driven, enclosed gearboxSpeed, rpm750 or 640Conditioner roll tension adjustmentConditioner gap adjustmentLeaningEdge™ Flail Tine Conditioning SystemCompatibilityNumber of tapered flail tines90Length, in. (mm)90 (2286)Diameter, in. (mm)1400Drive methodBeltSpeed, rpm1042 or 752 with kitConditioner gap adjustmentCrop DischargeSwath width, ft. (m)6 (1.8)Windrow width, ft. (m)3 – 6 (.91 – 1.8)Driveline540 rpm, 6-spline 1-3/8” input speed1,000 rpm, 21-spline 1-3/8” input speedSlip and overrunning clutch protectionHitchesDrawbar swivelDrawbar categoryASAE Category II or III2-point semi-mount swivel3-point hitch categoryASAE Category II, III-N, or IIITractor RequirementsMinimum PTO power, hp80Hydraulic requirement – rubber rolls1 double acting, 1 single actingHydraulic requirement – steel rolls–Hydraulic requirement – flails2 double actingElectrical7-pin connector for transport lightsDimensionsTransport width, ft. in. (m)10’ 4” (3.2)Operating weight – rubber rolls, lbs. (kg)5,760 (2,613)Operating weight – steel rolls, lbs. (kg)–Operating weight – flails, lbs. (kg)5,660 (2,567) Discbine® 312 PLUS Cutting Width, ft. in. (m)11’ 7” (3.5)Transport Width, ft. in. (m)11’ 10” (3.6) Number of Discs7Minimum PTO HP requirement85 Standard Optional Discbine® 312 PLUS CutterbarTypeMowMax™ II PLUS true modular cutterbarCutting width, ft. in. (cm)11’ 7” (3.5)Cutting height, in. (mm)0.5 – 2.6 (12 – 65)Cutting height w/ opt. adjustable shoes, in. (mm)0.5 – 5.6 (12 – 143)Number of discs/knives per disc7/2Maximum disc speed @ 1,000 rpm PTO2250Hydraulic tilt/cutting height controlTilt angle, degrees-2° to -10°Header flotationVertical & lateral, adjustable springsShockPRO™ disc drive protection system3-year factory cutterbar warrantyRoll Conditioning SystemsChevron intermeshing rubber rollsChevron intermeshing steel rollsLength, in. (mm)102 (2591)Diameter, in. (mm)10.4 (264)Drive methodBelt-driven, enclosed gearboxSpeed, rpm750 or 640Conditioner roll tension adjustmentConditioner gap adjustmentLeaningEdge™ Flail Tine Conditioning SystemCompatibilityNumber of tapered flail tines100Length, in. (mm)102 (2591)Diameter, in. (mm)1400Drive methodBeltSpeed, rpm1042 or 752 with kitConditioner gap adjustmentCrop DischargeSwath width, ft. (m)7 (2.1)Windrow width, ft. (m)3 – 7 (.91 – 2.4)Driveline540 rpm, 6-spline 1-3/8” input speed–1,000 rpm, 21-spline 1-3/8” input speedSlip and overrunning clutch protectionHitchesDrawbar swivelDrawbar categoryASAE Category II or III2-point semi-mount swivel3-point hitch categoryASAE Category II, III-N, or IIITractor RequirementsMinimum PTO power, hp85Hydraulic requirement – rubber rolls1 double acting, 1 single actingHydraulic requirement – steel rolls1 double acting, 1 single actingHydraulic requirement – flails2 double actingElectrical7-pin connector for transport lightsDimensionsTransport width, ft. in. (m)11’ 10” (3.6)Operating weight – rubber rolls, lbs. (kg)5,880 (2,667)Operating weight – steel rolls, lbs. (kg)5,980 (2,712)Operating weight – flails, lbs. (kg)5,760 (2,613) Discbine® 313 PLUS Cutting Width, ft. in. (m)13’ 1” (4.0)Transport Width, ft. in. (m)13’ 5” (4.03)Number of Discs8Minimum PTO HP requirement90 Standard Optional Discbine® 313 PLUS CutterbarTypeMowMax™ II PLUS true modular cutterbarCutting width, ft. in. (cm)13’ 1” (4.0)Cutting height, in. (mm)0.5 – 2.6 (12 – 65)Cutting height w/ opt. adjustable shoes, in. (mm)0.5 – 5.6 (12 – 143)Number of discs/knives per disc8/2Maximum disc speed @ 1,000 rpm PTO2250Hydraulic tilt/cutting height controlTilt angle, degrees-2° to -10°Header flotationVertical & lateral, adjustable springsShockPRO™ disc drive protection system3-year factory cutterbar warrantyRoll Conditioning SystemsChevron intermeshing rubber rollsChevron intermeshing steel rollsLength, in. (mm)125 (3175)Diameter, in. (mm)10.4 (264)Drive methodBelt-driven, enclosed gearboxSpeed, rpm750 or 640Conditioner roll tension adjustmentConditioner gap adjustmentLeaningEdge™ Flail Tine Conditioning SystemCompatibilityNumber of tapered flail tines120Length, in. (mm)125 (3175)Diameter, in. (mm)1400Drive methodBeltSpeed, rpm1042 or 752 with kitConditioner gap adjustmentCrop DischargeSwath width, ft. (m)10 (3)Windrow width, ft. (m)3 – 8 (.91 – 2.4)Driveline540 rpm, 6-spline 1-3/8” input speed–1,000 rpm, 21-spline 1-3/8” input speedSlip and overrunning clutch protectionHitchesDrawbar swivelDrawbar categoryASAE Category II or III2-point semi-mount swivel3-point hitch categoryASAE Category II, III-N, or IIITractor RequirementsMinimum PTO power, hp90Hydraulic requirement – rubber rolls1 double acting, 1 single actingHydraulic requirement – steel rolls1 double acting, 1 single actingHydraulic requirement – flails2 double actingElectrical7-pin connector for transport lightsDimensionsTransport width, ft. in. (m)13’ 5” (4.03)Operating weight – rubber rolls, lbs. (kg)6,255 (2,837)Operating weight – steel rolls, lbs. (kg)6,460 (2,930)Operating weight – flails, lbs. (kg)6,147 (2,788) Discbine® 316 PLUS Cutting Width, ft. in. (m)16’ 5” (5.0)Transport Width, ft. in. (m)16’ 8” (5.07)Number of Discs10Minimum PTO HP requirement100 Standard Optional Discbine® 316 PLUS CutterbarTypeMowMax™ II PLUS true modular cutterbarCutting width, ft. in. (cm)16’ 5” (5.0)Cutting height, in. (mm)0.5 – 2.6 (12 – 65)Cutting height w/ opt. adjustable shoes, in. (mm)0.5 – 5.6 (12 – 143)Number of discs/knives per disc10/2Maximum disc speed @ 1,000 rpm PTO2250Hydraulic tilt/cutting height controlTilt angle, degrees-2° to -10°Header flotationVertical & lateral, adjustable springsShockPRO™ disc drive protection system3-year factory cutterbar warrantyRoll Conditioning SystemsChevron intermeshing rubber rollsChevron intermeshing steel rollsLength, in. (mm)125 (3175)Diameter, in. (mm)10.4 (264)Drive methodBelt-driven, enclosed gearboxSpeed, rpm750 or 640Conditioner roll tension adjustmentConditioner gap adjustmentLeaningEdge™ Flail Tine Conditioning SystemCompatibility–Number of tapered flail tines–Length, in. (mm)–Diameter, in. (mm)–Drive method–Speed, rpm–Conditioner gap adjustment–Crop DischargeSwath width, ft. (m)10 (3)Windrow width, ft. (m)3 – 8 (.91 – 2.4)Driveline540 rpm, 6-spline 1-3/8” input speed–1,000 rpm, 21-spline 1-3/8” input speedSlip and overrunning clutch protectionHitchesDrawbar swivelDrawbar categoryASAE Category II or III2-point semi-mount swivel3-point hitch categoryASAE Category II, III-N, or IIITractor RequirementsMinimum PTO power, hp100Hydraulic requirement – rubber rolls1 double acting, 1 single actingHydraulic requirement – steel rolls1 double acting, 1 single actingHydraulic requirement – flails–Electrical7-pin connector for transport lightsDimensionsTransport width, ft. in. (m)16’ 8” (5.07)Operating weight – rubber rolls, lbs. (kg)6,980 (3,166)Operating weight – steel rolls, lbs. (kg)7,080 (3,211)Operating weight – flails, lbs. (kg)–