DISCBINE® PLUS CENTER-PIVOT DISC MOWER-CONDITIONERS

REDEFINING THE DISC MOWER-CONDITIONER

Features

CLEANER AND CLOSER CUTTING

Get the cleanest and closest cut yet with the MowMax™ II PLUS true modular cutterbar. Faster knife tip speed, a slimmer cutterbar profile, and reshaped rock guards improve cut quality while providing a 30% lower cutting height.

TIME-SAVING INNOVATIONS

The standard QuickMax™ knife-change system and ShockPRO™ hubs are designed to save you hassle when you’re making hay. For additional peace of mind, the cutterbar is backed by a 36-month warranty.

PIVOT TO GREATER PRODUCTIVITY

Whether you need a nimble mower to enter tight places or big capacity for wide-open spaces, four center-pivot models, with cut widths from 10- to 16-feet wide, are designed and built with pride in New Holland, Pennsylvania.

FROM WIDE SWATHS TO NARROW WINDROWS

Choose between the chevron intermeshing rubber or steel rolls, or the LeaningEdge™ flail tine conditioning system to fit your needs. Enhanced swath control surfaces behind the conditioning system result in neater-looking swaths with improved dry down.

Gallery

Technical information

Standard

Optional

Cutterbar


Type
Cutting width, ft. in. (cm)
Cutting height, in. (mm)
Cutting height w/ opt. adjustable shoes, in. (mm)
Number of discs/knives per disc
Maximum disc speed @ 1,000 rpm PTO
Hydraulic tilt/cutting height control
Tilt angle, degrees
Header flotation
ShockPRO™ disc drive protection system
3-year factory cutterbar warranty

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS
MowMax™ II PLUS true modular cutterbar	MowMax™ II PLUS true modular cutterbar	MowMax™ II PLUS true modular cutterbar	MowMax™ II PLUS true modular cutterbar
10’ 1” (3.0)	11’ 7” (3.5)	13’ 1” (4.0)	16’ 5” (5.0)
0.5 – 2.6 (12 – 65)	0.5 – 2.6 (12 – 65)	0.5 – 2.6 (12 – 65)	0.5 – 2.6 (12 – 65)
0.5 – 5.6 (12 – 143)	0.5 – 5.6 (12 – 143)	0.5 – 5.6 (12 – 143)	0.5 – 5.6 (12 – 143)
6/2	7/2	8/2	10/2
2250	2250	2250	2250

-2° to -10°	-2° to -10°	-2° to -10°	-2° to -10°
Vertical & lateral, adjustable springs	Vertical & lateral, adjustable springs	Vertical & lateral, adjustable springs	Vertical & lateral, adjustable springs

Roll Conditioning Systems


Chevron intermeshing rubber rolls
Chevron intermeshing steel rolls
Length, in. (mm)
Diameter, in. (mm)
Drive method
Speed, rpm
Conditioner roll tension adjustment
Conditioner gap adjustment

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS

–
90 (2286)	102 (2591)	125 (3175)	125 (3175)
10.4 (264)	10.4 (264)	10.4 (264)	10.4 (264)
Belt-driven, enclosed gearbox	Belt-driven, enclosed gearbox	Belt-driven, enclosed gearbox	Belt-driven, enclosed gearbox
750 or 640	750 or 640	750 or 640	750 or 640

LeaningEdge™ Flail Tine Conditioning System


Compatibility
Number of tapered flail tines
Length, in. (mm)
Diameter, in. (mm)
Drive method
Speed, rpm
Conditioner gap adjustment

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS
			–
90	100	120	–
90 (2286)	102 (2591)	125 (3175)	–
1400	1400	1400	–
Belt	Belt	Belt	–
1042 or 752 with kit	1042 or 752 with kit	1042 or 752 with kit	–
			–

Crop Discharge


Swath width, ft. (m)
Windrow width, ft. (m)

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS
6 (1.8)	7 (2.1)	10 (3)	10 (3)
3 – 6 (.91 – 1.8)	3 – 7 (.91 – 2.4)	3 – 8 (.91 – 2.4)	3 – 8 (.91 – 2.4)

Driveline


540 rpm, 6-spline 1-3/8” input speed
1,000 rpm, 21-spline 1-3/8” input speed
Slip and overrunning clutch protection

Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS
–	–	–

Hitches


Drawbar swivel
Drawbar category
2-point semi-mount swivel
3-point hitch category

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS

ASAE Category II or III	ASAE Category II or III	ASAE Category II or III	ASAE Category II or III

ASAE Category II, III-N, or III	ASAE Category II, III-N, or III	ASAE Category II, III-N, or III	ASAE Category II, III-N, or III

Tractor Requirements


Minimum PTO power, hp
Hydraulic requirement – rubber rolls
Hydraulic requirement – steel rolls
Hydraulic requirement – flails
Electrical

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS
80	85	90	100
1 double acting, 1 single acting	1 double acting, 1 single acting	1 double acting, 1 single acting	1 double acting, 1 single acting
–	1 double acting, 1 single acting	1 double acting, 1 single acting	1 double acting, 1 single acting
2 double acting	2 double acting	2 double acting	–
7-pin connector for transport lights	7-pin connector for transport lights	7-pin connector for transport lights	7-pin connector for transport lights

Dimensions


Transport width, ft. in. (m)
Operating weight – rubber rolls, lbs. (kg)
Operating weight – steel rolls, lbs. (kg)
Operating weight – flails, lbs. (kg)

Discbine® 310 PLUS	Discbine® 312 PLUS	Discbine® 313 PLUS	Discbine® 316 PLUS
10’ 4” (3.2)	11’ 10” (3.6)	13’ 5” (4.03)	16’ 8” (5.07)
5,760 (2,613)	5,880 (2,667)	6,255 (2,837)	6,980 (3,166)
–	5,980 (2,712)	6,460 (2,930)	7,080 (3,211)
5,660 (2,567)	5,760 (2,613)	6,147 (2,788)	–

Standard Optional – Not available