Models

Discbine® 313 (flail)

Number of discs8
Cutting Width13 ft., 0 in.
Conditioning SystemFlails
Tongue DesignCenter-pivot


Standard  Optional 
Discbine® 313 (flail)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)13' 0" (4)
Number of discs8
Number of knives16 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
TypeChoice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive4 HB V-belt
Conditioner Intensity AdjustmentSingle crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)13' 4" (4.04)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)21' 3" (6.5)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)27' 5'' (8.4)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)26' 5" (8.1)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)23' 0'' (7.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)22' 0'' (6.7)
Weight, Operating lbs. (kg)6,275 (2846)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

Discbine® 313 (roll)

Number of discs8
Cutting Width13 ft., 0 in.
Conditioning SystemChevron intermeshing molded rubber rolls, chevron intermeshing steel rolls
Tongue DesignCenter-pivot


Standard  Optional 
Discbine® 313 (roll)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)13' 0" (4)
Number of discs8
Number of knives16 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
TypeChoice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive4 HB V-belt
Conditioner Intensity AdjustmentSingle crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)13' 4" (4.04)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)21' 3" (6.5)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)27' 5'' (8.4)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)26' 5" (8.1)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)23' 0'' (7.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)22' 0'' (6.7)
Weight, Operating lbs. (kg)6,275 (2846)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

Discbine® 316 (roll)

Number of discs10
Cutting Width16 ft., 3 in.
Conditioning SystemChevron intermeshing molded rubber rolls, chevron intermeshing steel rolls
Tongue DesignCenter-pivot


Standard  Optional 
Discbine® 316 (roll)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)16' 3'' (4.95)
Number of discs10
Number of knives20 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
TypeChoice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive4 HB V-belt
Conditioner Intensity AdjustmentSingle crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)16' 7" (5.05)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)25' 7" (7.8)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)32' 0'' (9.7)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)31' 0'' (9.4)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)26' 7'' (8.1)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)25' 7'' (7.8)
Weight, Operating lbs. (kg)6,700 (3039)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

Standard Optional – Not Available
*Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
**Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.


Find a dealer

Search Now

You are at


Let's stay in touch



New Holland Agriculture a brand of CNH Industrial ©
back to top