COMPACT WHEEL LOADERS STAGE - V Construction

Features

Low total cost of ownership

C Series models feature an advanced 3.4 liter, 4-cylinder, Stage V F5H engine developed in house by sister company FPT Industrial, who pioneered low emission, high efficiency solutions for on and off-road applications.

High versatility

The choice of one or two auxiliary hydraulic circuits and the availability of high flow in combination with creep speed allows work to be done at max flow at a constantly low forward pace.

Superior performance

The weight distribution enables the new compact wheel loader to fully benefit from its impressive improved lifting capacity.

High precision

The Inch & Brake pedal progressively disengages the transmission in the decelerating phase while progressively engaging the brakes, giving the operator millimetric control of the machine at low speeds.

Gallery

models

New Holland W50C Z-BAR

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]43/58 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3134
Bucket width (mm)1900


Standard  Optional 
New Holland W50C Z-BAR
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]43/58 @ 2500rpm
Max. torque - ISO 14396 (Nm)250 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)67 / 210
High flow circuit - flow / pressure (lpm / bar)–
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1
Maximum speed (kph)20
Axles and differentials
Rear axle - total oscillation (°)18
Front and rear axles typeLimited slip differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeDrum
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres12.5-18/ 335/80 R18 / 365/70 R18 / Agriculture 340/80 R18
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres12.5-80
Reference bucket w/ cutting edge and HP couplerGP 0.7m³
Cab height (mm)2458
Wheelbase (mm)2075
Ground clearance (mm)444
Overall length w/ bucket (mm)5314
Hinge pin height (mm)3134
Dumping height (mm)2454
Max. obstacle height (mm)2580
Max. bucket height (mm)3926
Dumping reach (mm)783
Overall length w/ forks 1200mm long (mm)5958
Reach @ ground level (mm)910
Max. reach (mm)1337
Forks height @ max. reach (mm)1330
Forks reach @ max. height (mm)576
Max. forks height (mm)2967
Overall forks height (mm)3534
Machine width (mm)1740
Bucket width (mm)1900
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)1451
Tipping load - Straight (kg)3518
Tipping load - Articulated at 40° (kg)2903
Maximum breakout force (kg)4288
Operating weight (kg)4583
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)1648
Operating weight (kg)4570

New Holland W50C TC

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]43/58 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3113
Bucket width (mm)1900


Standard  Optional 
New Holland W50C TC
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]43/58 @ 2500rpm
Max. torque - ISO 14396 (Nm)250 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)67 / 210
High flow circuit - flow / pressure (lpm / bar)–
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1
Maximum speed (kph)20
Axles and differentials
Rear axle - total oscillation (°)18
Front and rear axles typeLimited slip differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeCaliper type on front axle
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres12.5-18/ 335/80 R18 / 365/70 R18 / Agriculture 340/80 R18
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres12.5-80
Reference bucket w/ cutting edge and HP couplerGP 0.7m³
Cab height (mm)2458
Wheelbase (mm)2075
Ground clearance (mm)444
Overall length w/ bucket (mm)5219
Hinge pin height (mm)3113
Dumping height (mm)2396
Max. obstacle height (mm)2555
Max. bucket height (mm)3945
Dumping reach (mm)668
Overall length w/ forks 1200mm long (mm)5168
Reach @ ground level (mm)769
Max. reach (mm)1259
Forks height @ max. reach (mm)1344
Forks reach @ max. height (mm)457
Max. forks height (mm)2959
Overall forks height (mm)3633
Machine width (mm)1740
Bucket width (mm)1900
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)1600
Tipping load - Straight (kg)3703
Tipping load - Articulated at 40° (kg)3200
Maximum breakout force (kg)3775
Operating weight (kg)5010
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)2052
Operating weight (kg)4910

New Holland W60C Z-BAR

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]48/64 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3182
Bucket width (mm)2050


Standard  Optional 
New Holland W60C Z-BAR
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]48/64 @ 2500rpm
Max. torque - ISO 14396 (Nm)260 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)67 / 230
High flow circuit - flow / pressure (lpm / bar)–
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1
Maximum speed (kph)20
Axles and differentials
Rear axle - total oscillation (°)18
Front and rear axles typeLimited slip differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeCaliper type on front axle
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres12.5-18/ 335/80 R18 / 365/70 R18 / 405/70 R18/ Agriculture 340/80 R18
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres335/80 R18
Reference bucket w/ cutting edge and HP couplerGP 0.8m³
Cab height (mm)2457
Wheelbase (mm)2075
Ground clearance (mm)444
Overall length w/ bucket (mm)5439
Hinge pin height (mm)3182
Dumping height (mm)2484
Max. obstacle height (mm)2596
Max. bucket height (mm)4011
Dumping reach (mm)862
Overall length w/ forks 1200mm long (mm)6058
Reach @ ground level (mm)1012
Max. reach (mm)1422
Forks height @ max. reach (mm)1329
Forks reach @ max. height (mm)638
Max. forks height (mm)3014
Overall forks height (mm)3582
Machine width (mm)1740
Bucket width (mm)2050
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)1855
Tipping load - Straight (kg)4217
Tipping load - Articulated at 40° (kg)3711
Maximum breakout force (kg)5382
Operating weight (kg)5400
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)2107
Operating weight (kg)5275

New Holland W60C TC

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]48/64 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3128
Bucket width (mm)2050


Standard  Optional 
New Holland W60C TC
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]48/64 @ 2500rpm
Max. torque - ISO 14396 (Nm)260 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)67 / 230
High flow circuit - flow / pressure (lpm / bar)–
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1
Maximum speed (kph)20
Axles and differentials
Rear axle - total oscillation (°)18
Front and rear axles typeLimited slip differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeCaliper type on front axle
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres12.5-18 / 335/80 R18 / 365/70 R18 / 405/70 R18 / Agriculture 340/80 R18
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres335/80 R18
Reference bucket w/ cutting edge and HP couplerGP 0.8m³
Cab height (mm)2457
Wheelbase (mm)2075
Ground clearance (mm)444
Overall length w/ bucket (mm)5272
Hinge pin height (mm)3128
Dumping height (mm)2396
Max. obstacle height (mm)2540
Max. bucket height (mm)3966
Dumping reach (mm)705
Overall length w/ forks 1200mm long (mm)5844
Reach @ ground level (mm)797
Max. reach (mm)1272
Forks height @ max. reach (mm)1343
Forks reach @ max. height (mm)472
Max. forks height (mm)2973
Overall forks height (mm)3645
Machine width (mm)1740
Bucket width (mm)2050
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)1743
Tipping load - Straight (kg)4032
Tipping load - Articulated at 40° (kg)3486
Maximum breakout force (kg)3574
Operating weight (kg)5210
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)2200
Operating weight (kg)5090

New Holland W70C Z-BAR

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]55/75 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3290
Bucket width (mm)2050


Standard  Optional 
New Holland W70C Z-BAR
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]55/75 @ 2500rpm
Max. torque - ISO 14396 (Nm)314 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)85 / 230
High flow circuit - flow / pressure (lpm / bar)130 / 200
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1 or 2
Maximum speed (kph)18 / 30
Axles and differentials
Rear axle - total oscillation (°)20
Front and rear axles typeLimited slip differential or 100% lockable differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeCaliper type on front axle
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres12.5-20 / 14.5-20 / 365/70 R18 / 365/80 R20 / 405/70 R20 / Agriculture 400/70 R20 / Flotation 550/45 R22.5 / Snow 360/80 R20
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres365/70 R18
Reference bucket w/ cutting edge and HP couplerGP 0.9m³
Cab height (mm)2627
Wheelbase (mm)2225
Ground clearance (mm)440
Overall length w/ bucket (mm)5674
Hinge pin height (mm)3290
Dumping height (mm)2563
Max. obstacle height (mm)2750
Max. bucket height (mm)4180
Dumping reach (mm)880
Overall length w/ forks 1200mm long (mm)6246
Reach @ ground level (mm)1001
Max. reach (mm)1440
Forks height @ max. reach (mm)1391
Forks reach @ max. height (mm)632
Max. forks height (mm)3129
Overall forks height (mm)3805
Machine width (mm)1860
Bucket width (mm)2050
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)1907
Tipping load - Straight (kg)4435
Tipping load - Articulated at 40° (kg)3814
Maximum breakout force (kg)5895
Operating weight (kg)5672
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)2249
Operating weight (kg)5559

New Holland W80C Z-BAR

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]55/75 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3395
Bucket width (mm)2100


Standard  Optional 
New Holland W80C Z-BAR
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]55/75 @ 2500rpm
Max. torque - ISO 14396 (Nm)314 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)85 / 230
High flow circuit - flow / pressure (lpm / bar)130 / 200
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1 or 2
Maximum speed (kph)20 / 35
Axles and differentials
Rear axle - total oscillation (°)20
Front and rear axles typeLimited slip differential or 100% lockable differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeCaliper type on front axle
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres14.5-20 / 365/80 R20 / 405/70 R20 / Agriculture 400/70 R20 / Flotation 550/45 R22.5 / Snow 360/80 R20
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres405/70 R20
Reference bucket w/ cutting edge and HP couplerGP 1.0m³
Cab height (mm)2680
Wheelbase (mm)2225
Ground clearance (mm)493
Overall length w/ bucket (mm)5735
Hinge pin height (mm)3395
Dumping height (mm)2651
Max. obstacle height (mm)2831
Max. bucket height (mm)4322
Dumping reach (mm)880
Overall length w/ forks 1200mm long (mm)6279
Reach @ ground level (mm)976
Max. reach (mm)1445
Forks height @ max. reach (mm)1450
Forks reach @ max. height (mm)614
Max. forks height (mm)3237
Overall forks height (mm)3805
Machine width (mm)1860
Bucket width (mm)2100
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)2010
Tipping load - Straight (kg)4822
Tipping load - Articulated at 40° (kg)4019
Maximum breakout force (kg)5833
Operating weight (kg)6200
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)2449
Operating weight (kg)6060

New Holland W80C LR

Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]55/75 @ 2500rpm
Driveline4WD Hydrostatic
Hinge pin height (mm)3705
Bucket width (mm)2100


Standard  Optional 
New Holland W80C LR
Engine*
Engine*FPT F5H
No. of Cylinders / Valves4 / 2
Displacement (cm³)3400
AspirationTurbocharged
InjectionHigh Pressure Common Rail
ExhausteCEGR + DOC + DPF
Compliant with engine emissions regulationsStage V
Rated engine power - ISO 14396 - ECE R120 [kW/hp(CV)]55/75 @ 2500rpm
Max. torque - ISO 14396 (Nm)314 @ 1400rpm
Fuel tank capacity (Litres)87
Hydraulics Loader-Articulation
System typeIntegrated steering / loader open-center circuit
Main pump - flow / pressure (lpm / bar)85 / 230
High flow circuit - flow / pressure (lpm / bar)130 / 200
Hydraulic oil tank / system capacity (Litres)40 / 57.2
Driveline
Type of transmission4WD Hydrostatic
Number of mechanical speed1 or 2
Maximum speed (kph)20 / 35
Axles and differentials
Rear axle - total oscillation (°)20
Front and rear axles typeLimited slip differential or 100% lockable differential
Brakes
Service brake controlHydraulic foot operated
Service brake typeCaliper type on front axle
Parking brakeCaliper type on front axle, mechanically actuated
Tyres
Wide choice of industrial and agricultural tyres14.5-20 / 365/80 R20 / 405/70 R20 / Agriculture 400/70 R20 / Flotation 550/45 R22.5 / Snow 360/80 R20
Cab
Protection against falling objects (FOPS) ISO 3449:2005 - Level II
Protection against roll over (ROPS) ISO 3471:2008
Sound pressure level at operator’s station - LpA - ISO 6396:2008 [dB(A)]71
Outside sound power level - LwA - EU Directive 2000/14/EC [dB(A)]101
Main dimensions
Reference tyres405/70 R20
Reference bucket w/ cutting edge and HP couplerGP 1.0m³
Cab height (mm)2680
Wheelbase (mm)2225
Ground clearance (mm)493
Overall length w/ bucket (mm)6165
Hinge pin height (mm)3705
Dumping height (mm)2957
Max. obstacle height (mm)3075
Max. bucket height (mm)4531
Dumping reach (mm)1112
Overall length w/ forks 1200mm long (mm)6717
Reach @ ground level (mm)1413
Max. reach (mm)1814
Forks height @ max. reach (mm)1468
Forks reach @ max. height (mm)852
Max. forks height (mm)3537
Overall forks height (mm)4105
Machine width (mm)1860
Bucket width (mm)2100
Loading performance w/ bucket**
Payload ISO 14397-1 Deflected tyres (kg)1640
Tipping load - Straight (kg)3957
Tipping load - Articulated at 40° (kg)3279
Maximum breakout force (kg)5666
Operating weight (kg)6225
Loading performance w/ forks (1200mm long)**
Payload - Firm and level ground (kg)1987
Operating weight (kg)6093
Back

Standard Optional – Not available
* Developed by FPT Industrial
** W60C & W80C include additional 150kg counterweight