T4 V

T4.65V

Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	48/65
Transmission	16 x 16 Shuttle Command™
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Minimum overall width (mm)	1061

T4.65V
Standard Optional
New Holland Engine*
New Holland Engine*	F5C
No. of cylinders / Capacity / Valves / Emissions Level	4 / 3200 / 2 / Tier 3
Aspiration	Turbocharged
Intercooler
Approved biodiesel Blend	B100**
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	48/65
Rated Engine Speed (rpm)	2300
Max. Torque ISO TR14396 (Nm)	290@1250rpm
Torque reserve (%)	46
Horizontal Exhaust
Vertical exhaust (Cab only)
Internal EGR
Cooling method	Liquid
Optimum fuel Consumption (g/kWh)	219
Fuel tank capacity standard front axle (L)	67/77
Fuel Tank capacity SuperSteer™ front axle (L)	–
Service Interval (hrs)	500
Transmission
Electro hydraulic diff. lock
Mechanical diff. lock	–
Suspended pedals
Oil immersed braking system
16 x 16 Shuttle Command™ (30kph / 40kph)
16 x 16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)	0.17
32 x 16 Spilt Command™ (30kph / 40kph)
32 x 16 Spilt Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
16 x 16 Powershuttle (30kph / 40kph)
16 x 16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)	0.7
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
Minimum speed (With Creeper) (km/h)	0.17
Power Clutch (Dual Command™ transmission only)
Front axle
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle	–
Auto 4WD Standard / SuperSteer	/ –
Steering angle 2WD front axle (°)	57
Steering angle 4WD front axle (°)	55
Steering angle SuperSteer front axle (°)	–
Turn radius 2WD front axle (mm)	3000
Turn radius 4WD front axle (mm)	3400
Turn radius SuperSteer front axle (mm)	–
Dynamic fenders	–
Electro hydraulic diff. Lock.
Independent steering pump (28Lpm or 35.6Lpm Megaflow pump)
Front braking system
Axle oscillation (°)	8
Hydraulic system
Standard pump flow (Lpm)	48.6
Optional MegaFlow™ pump flow (Lpm)	63.8
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends)(kg)	1835
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Rear Linkage category	I & II
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)	10/8+2motor
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
Five mid-mount outlets (only rops)
SuperSteer™ front lift & PTO (mechanically or electronically engaged)	–
Max. front linkage lift capacity at ball ends (kg)	–
PTO
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab with FOPS
Cab category level - EN 15695	1
Air conditioning
Blue Cab with FOPS
Blue Cab category level - EN 15695	2
Dimensions & Weights***
Wheelbase 2WD (mm)	2078
Wheelbase 4WD (mm)	2093
Wheelbase SuperSteer™ 4WD front axle (mm)	–
Overall length 4WD (mm)	3925
Minimum overall width (mm)	1061
Height to top of ROPS (mm)	2249
Height to top of cab (mm)	2148
Height at centre rear axle to top of cab (mm)	1648
Ground clearance min (mm)	270
T4V front wheel track setting 2WD (mm)	878 - 978
T4V front wheel track setting 4WD (mm)	879 - 985
T4V rear wheel track setting 4WD (mm)	861 - 1261
T4V Weights**** 2WD/4WD (kg)	2459/2710
Max. permissible weight (kg)	3800

T4.75V

Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	57/78
Transmission	16 x 16 Shuttle Command™
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Minimum overall width (mm)	1061

T4.75V
Standard Optional
New Holland Engine*
New Holland Engine*	F5C
No. of cylinders / Capacity / Valves / Emissions Level	4 / 3200 / 2 / Tier 3
Aspiration	Turbocharged
Intercooler
Approved biodiesel Blend	B100**
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	57/78
Rated Engine Speed (rpm)	2300
Max. Torque ISO TR14396 (Nm)	330@1250rpm
Torque reserve (%)	39
Horizontal Exhaust
Vertical exhaust (Cab only)
Internal EGR
Cooling method	Liquid
Optimum fuel Consumption (g/kWh)	218
Fuel tank capacity standard front axle (L)	67/77
Fuel Tank capacity SuperSteer™ front axle (L)	–
Service Interval (hrs)	500
Transmission
Electro hydraulic diff. lock
Mechanical diff. lock	–
Suspended pedals
Oil immersed braking system
16 x 16 Shuttle Command™ (30kph / 40kph)
16 x 16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)	0.17
32 x 16 Spilt Command™ (30kph / 40kph)
32 x 16 Spilt Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
16 x 16 Powershuttle (30kph / 40kph)
16 x 16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)	0.7
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
Minimum speed (With Creeper) (km/h)	0.17
Power Clutch (Dual Command™ transmission only)
Front axle
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle	–
Auto 4WD Standard / SuperSteer	/ –
Steering angle 2WD front axle (°)	57
Steering angle 4WD front axle (°)	55
Steering angle SuperSteer front axle (°)	–
Turn radius 2WD front axle (mm)	3000
Turn radius 4WD front axle (mm)	3400
Turn radius SuperSteer front axle (mm)	–
Dynamic fenders	–
Electro hydraulic diff. Lock.
Independent steering pump (28Lpm or 35.6Lpm Megaflow pump)
Front braking system
Axle oscillation (°)	8
Hydraulic system
Standard pump flow (Lpm)	48.6
Optional MegaFlow™ pump flow (Lpm)	63.8
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends)(kg)	1835
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Rear Linkage category	I & II
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)	10/8+2motor
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
Five mid-mount outlets (only rops)
SuperSteer™ front lift & PTO (mechanically or electronically engaged)	–
Max. front linkage lift capacity at ball ends (kg)	–
PTO
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab with FOPS
Cab category level - EN 15695	1
Air conditioning
Blue Cab with FOPS
Blue Cab category level - EN 15695	2
Dimensions & Weights***
Wheelbase 2WD (mm)	2078
Wheelbase 4WD (mm)	2093
Wheelbase SuperSteer™ 4WD front axle (mm)	–
Overall length 4WD (mm)	3925
Minimum overall width (mm)	1061
Height to top of ROPS (mm)	2249
Height to top of cab (mm)	2148
Height at centre rear axle to top of cab (mm)	1648
Ground clearance min (mm)	270
T4V front wheel track setting 2WD (mm)	878 - 978
T4V front wheel track setting 4WD (mm)	879 - 985
T4V rear wheel track setting 4WD (mm)	861 - 1261
T4V Weights**** 2WD/4WD (kg)	2459/2710
Max. permissible weight (kg)	3800

T4.85V

Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	65/88
Transmission	16 x 16 Shuttle Command™
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Minimum overall width (mm)	1061

T4.85V
Standard Optional
New Holland Engine*
New Holland Engine*	F5C
No. of cylinders / Capacity / Valves / Emissions Level	4 / 3200 / 2 / Tier 3
Aspiration	Turbocharged
Intercooler
Approved biodiesel Blend	B100**
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	65/88
Rated Engine Speed (rpm)	2300
Max. Torque ISO TR14396 (Nm)	352@1250rpm
Torque reserve (%)	30
Horizontal Exhaust
Vertical exhaust (Cab only)
Internal EGR
Cooling method	Liquid
Optimum fuel Consumption (g/kWh)	219
Fuel tank capacity standard front axle (L)	67/77
Fuel Tank capacity SuperSteer™ front axle (L)	–
Service Interval (hrs)	500
Transmission
Electro hydraulic diff. lock
Mechanical diff. lock	–
Suspended pedals
Oil immersed braking system
16 x 16 Shuttle Command™ (30kph / 40kph)
16 x 16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)	0.17
32 x 16 Spilt Command™ (30kph / 40kph)
32 x 16 Spilt Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
16 x 16 Powershuttle (30kph / 40kph)
16 x 16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)	0.7
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
Minimum speed (With Creeper) (km/h)	0.17
Power Clutch (Dual Command™ transmission only)
Front axle
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle	–
Auto 4WD Standard / SuperSteer	/ –
Steering angle 2WD front axle (°)	57
Steering angle 4WD front axle (°)	55
Steering angle SuperSteer front axle (°)	–
Turn radius 2WD front axle (mm)	3000
Turn radius 4WD front axle (mm)	3400
Turn radius SuperSteer front axle (mm)	–
Dynamic fenders	–
Electro hydraulic diff. Lock.
Independent steering pump (28Lpm or 35.6Lpm Megaflow pump)
Front braking system
Axle oscillation (°)	8
Hydraulic system
Standard pump flow (Lpm)	48.6
Optional MegaFlow™ pump flow (Lpm)	63.8
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends)(kg)	1835
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Rear Linkage category	I & II
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)	10/8+2motor
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
Five mid-mount outlets (only rops)
SuperSteer™ front lift & PTO (mechanically or electronically engaged)	–
Max. front linkage lift capacity at ball ends (kg)	–
PTO
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab with FOPS
Cab category level - EN 15695	1
Air conditioning
Blue Cab with FOPS
Blue Cab category level - EN 15695	2
Dimensions & Weights***
Wheelbase 2WD (mm)	2078
Wheelbase 4WD (mm)	2093
Wheelbase SuperSteer™ 4WD front axle (mm)	–
Overall length 4WD (mm)	3925
Minimum overall width (mm)	1061
Height to top of ROPS (mm)	2249
Height to top of cab (mm)	2148
Height at centre rear axle to top of cab (mm)	1648
Ground clearance min (mm)	270
T4V front wheel track setting 2WD (mm)	878 - 978
T4V front wheel track setting 4WD (mm)	879 - 985
T4V rear wheel track setting 4WD (mm)	861 - 1261
T4V Weights**** 2WD/4WD (kg)	2459/2710
Max. permissible weight (kg)	3800

T4.95V

Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	71/97
Transmission	16 x 16 Shuttle Command™
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Minimum overall width (mm)	1061

T4.95V
Standard Optional
New Holland Engine*
New Holland Engine*	NEF
No. of cylinders / Capacity / Valves / Emissions Level	4 / 4500 / 2 / Tier 3
Aspiration	Turbocharged
Intercooler
Approved biodiesel Blend	B100**
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	71/97
Rated Engine Speed (rpm)	2300
Max. Torque ISO TR14396 (Nm)	398@1300rpm
Torque reserve (%)	35
Horizontal Exhaust
Vertical exhaust (Cab only)
Internal EGR
Cooling method	Liquid
Optimum fuel Consumption (g/kWh)	216
Fuel tank capacity standard front axle (L)	67/77
Fuel Tank capacity SuperSteer™ front axle (L)	–
Service Interval (hrs)	600
Transmission
Electro hydraulic diff. lock
Mechanical diff. lock	–
Suspended pedals
Oil immersed braking system
16 x 16 Shuttle Command™ (30kph / 40kph)
16 x 16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)	0.17
32 x 16 Spilt Command™ (30kph / 40kph)
32 x 16 Spilt Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
16 x 16 Powershuttle (30kph / 40kph)
16 x 16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)	0.7
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
Minimum speed (With Creeper) (km/h)	0.17
Power Clutch (Dual Command™ transmission only)
Front axle
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle	–
Auto 4WD Standard / SuperSteer	/ –
Steering angle 2WD front axle (°)	57
Steering angle 4WD front axle (°)	55
Steering angle SuperSteer front axle (°)	–
Turn radius 2WD front axle (mm)	3000
Turn radius 4WD front axle (mm)	3400
Turn radius SuperSteer front axle (mm)	–
Dynamic fenders	–
Electro hydraulic diff. Lock.
Independent steering pump (28Lpm or 35.6Lpm Megaflow pump)
Front braking system
Axle oscillation (°)	8
Hydraulic system
Standard pump flow (Lpm)	48.6
Optional MegaFlow™ pump flow (Lpm)	63.8
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends)(kg)	1835
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Rear Linkage category	I & II
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)	10/8+2motor
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
Five mid-mount outlets (only rops)
SuperSteer™ front lift & PTO (mechanically or electronically engaged)	–
Max. front linkage lift capacity at ball ends (kg)	–
PTO
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab with FOPS
Cab category level - EN 15695	1
Air conditioning
Blue Cab with FOPS
Blue Cab category level - EN 15695	2
Dimensions & Weights***
Wheelbase 2WD (mm)	2165
Wheelbase 4WD (mm)	2180
Wheelbase SuperSteer™ 4WD front axle (mm)	–
Overall length 4WD (mm)	4012
Minimum overall width (mm)	1061
Height to top of ROPS (mm)	2335
Height to top of cab (mm)	2148
Height at centre rear axle to top of cab (mm)	1648
Ground clearance min (mm)	270
T4V front wheel track setting 2WD (mm)	878 - 978
T4V front wheel track setting 4WD (mm)	879 - 985
T4V rear wheel track setting 4WD (mm)	861 - 1261
T4V Weights**** 2WD/4WD (kg)	2531/2790
Max. permissible weight (kg)	3800

T4.105V

Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	78/106
Transmission	16 x 16 Shuttle Command™
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Minimum overall width (mm)	1061

T4.105V
Standard Optional
New Holland Engine*
New Holland Engine*	NEF
No. of cylinders / Capacity / Valves / Emissions Level	4 / 4500 / 2 / Tier 3
Aspiration	Turbocharged
Intercooler
Approved biodiesel Blend	B100**
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]	78/106
Rated Engine Speed (rpm)	2300
Max. Torque ISO TR14396 (Nm)	425@1300rpm
Torque reserve (%)	31
Horizontal Exhaust
Vertical exhaust (Cab only)
Internal EGR
Cooling method	Liquid
Optimum fuel Consumption (g/kWh)	221
Fuel tank capacity standard front axle (L)	67/77
Fuel Tank capacity SuperSteer™ front axle (L)	–
Service Interval (hrs)	600
Transmission
Electro hydraulic diff. lock
Mechanical diff. lock	–
Suspended pedals
Oil immersed braking system
16 x 16 Shuttle Command™ (30kph / 40kph)
16 x 16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)	0.17
32 x 16 Spilt Command™ (30kph / 40kph)
32 x 16 Spilt Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
16 x 16 Powershuttle (30kph / 40kph)
16 x 16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)	0.7
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)	0.7
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
Minimum speed (With Creeper) (km/h)	0.17
Power Clutch (Dual Command™ transmission only)
Front axle
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle	–
Auto 4WD Standard / SuperSteer	/ –
Steering angle 2WD front axle (°)	57
Steering angle 4WD front axle (°)	55
Steering angle SuperSteer front axle (°)	–
Turn radius 2WD front axle (mm)	3000
Turn radius 4WD front axle (mm)	3400
Turn radius SuperSteer front axle (mm)	–
Dynamic fenders	–
Electro hydraulic diff. Lock.
Independent steering pump (28Lpm or 35.6Lpm Megaflow pump)
Front braking system
Axle oscillation (°)	8
Hydraulic system
Standard pump flow (Lpm)	48.6
Optional MegaFlow™ pump flow (Lpm)	63.8
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends)(kg)	1835
Max. lift capacity at ball ends with arms horizontal (kg)	2600
Rear Linkage category	I & II
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)	10/8+2motor
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
Five mid-mount outlets (only rops)
SuperSteer™ front lift & PTO (mechanically or electronically engaged)	–
Max. front linkage lift capacity at ball ends (kg)	–
PTO
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab with FOPS
Cab category level - EN 15695	1
Air conditioning
Blue Cab with FOPS
Blue Cab category level - EN 15695	2
Dimensions & Weights***
Wheelbase 2WD (mm)	2165
Wheelbase 4WD (mm)	2180
Wheelbase SuperSteer™ 4WD front axle (mm)	–
Overall length 4WD (mm)	4012
Minimum overall width (mm)	1061
Height to top of ROPS (mm)	2335
Height to top of cab (mm)	2148
Height at centre rear axle to top of cab (mm)	1648
Ground clearance min (mm)	270
T4V front wheel track setting 2WD (mm)	878 - 978
T4V front wheel track setting 4WD (mm)	879 - 985
T4V rear wheel track setting 4WD (mm)	861 - 1261
T4V Weights**** 2WD/4WD (kg)	2531/2790
Max. permissible weight (kg)	3800

Features

POWERFUL AND COMPACT

SPECIALIST VERSATILITY

PRODUCTIVE COMFORT

ENGINEERED TO REDUCE COSTS

Gallery

Models

T4.65V

T4.75V

T4.85V

T4.95V

T4.105V