MODELS

Discbine® 209

Cutting width ft. in. (m)9’ 2” (2.8)
Number of discs7
Conditioning SystemChevron rubber rolls or LeaningEdge™ flails
Tongue DesignSide-pull, straight tongue


Standard  Optional 
Discbine® 209
Cutterbar
Cutting width ft. in. (m)9’ 2” (2.8)
Cutterbar modelMowMax™ Modular Cutterbar with ShockPRO™ hubs
Number of discs7
Knives per disc2
Disc speed @ 540 rpm PTO speed rpm3000
Tilt angle degrees2° - 10°
FlotationUp & back, adjustable springs
Drive methodPTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm)1.1-2.7 (29-68)
Cutting height w/optional high-stubble shoes in. (mm)2.25-4.5 (58-115)
Cutting height w/optional adjustable shoes in. (mm)2.25-4.5 (58-115)
Roll Conditioners
TypeChevron intermeshing rubber
Length / Diameter in. (mm)90 (2286) / 10.4 (264)
Drive method4 HB V-belt and enclosed gears
Speed rpm647
Conditioner roll tension adjustmentSingle crank
Conditioner gap adjustmentAdjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
TypeFlail rotor with 90 tapered flails
Length / Diameter in. (mm)90 (2286) / 22 (560)
Drive method4 HB v-belt
Speed rpm718 std. 1000 opt.
Conditioner gap adjustmentSingle crank adjustable rotor hood
Crop Discharge
Swath width ft. (m)6 (1.83)
Windrow width ft. (m)3-6 (0.9-1.83)
Driveline
Input speed rpm540
Driveline protectionSlip clutch and overrunning clutch assembly at rear of PTO shaft
Secondary drivelineNon-CV driveline
Tongue Options
TypeSide-pull, straight tongue
Hitch typeDrawbar with CV PTO
Tractor Requirements
Minimum PTO power required hp (kW)65 (49)
Hydraulic circuits required2
Minimum relief pressure required psi (bar)1500 (103)
DrawbarASAE Category II
Swivel Hitch - Drawbar
Swivel Hitch - 2-Point
Electrical7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tires9.5L x 14L 6PR
Transport Speed
Max road speed mph (kph)20 (32)
Dimensions*
Width, transport ft. in. (m)9’ 11” (3.02)
Width , operating ft. in. (m)14’ 10” (4.52)
Length, transport ft. in. (m)Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
Length, operating ft. in. (m)Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)***
Height ft. in. (m)Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35)
Ground clearance with head fully raised in. (mm)17 (4.32)
Weights**
Operating weight lbs. (kg.)Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)***

Discbine® 210

Cutting width ft. in. (m)10’ 4” (3.16)
Number of discs8
Conditioning SystemChevron rubber or steel rolls, or LeaningEdge™ flails
Tongue DesignSide-pull, curved tongue


Standard  Optional 
Discbine® 210
Cutterbar
Cutting width ft. in. (m)10’ 4” (3.16)
Cutterbar modelMowMax™ Modular Cutterbar with ShockPRO™ hubs
Number of discs8
Knives per disc2
Disc speed @ 540 rpm PTO speed rpm3000
Tilt angle degrees2° - 10°
FlotationUp & back, adjustable springs
Drive methodPTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm)Flail Tine: 1.1-2.7 (29-68) or Roll: .95-2.4 (24-60)
Cutting height w/optional high-stubble shoes in. (mm)2.25-4.5 (58-115)
Cutting height w/optional adjustable shoes in. (mm)2.25-4.5 (58-115)
Roll Conditioners
TypeChevron intermeshing rubber or steel rolls
Length / Diameter in. (mm)102 (2591) / 10.4 (264)
Drive method4 HB V-belt and enclosed gears
Speed rpm647
Conditioner roll tension adjustmentSingle crank
Conditioner gap adjustmentAdjustable drawbolt stop, each end
LeaningEdge Flail Conditioners
TypeFlail rotor with 100 tapered flails
Length / Diameter in. (mm)102 (2591) / 22 (560)
Drive method4 HB v-belt
Speed rpm718 std. 1000 opt.
Conditioner gap adjustmentSingle crank adjustable rotor hood
Crop Discharge
Swath width ft. (m)7 (2.13)
Windrow width ft. (m)3-7 (0.9-2.13)
Driveline
Input speed rpm540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
Driveline protectionSlip clutch and overrunning clutch assembly at rear of PTO shaft
Secondary drivelineDouble CV Driveline - Head repositionable under load
Tongue Options
TypeSide-pull, curved tongue
Hitch typeStandard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch
Tractor Requirements
Minimum PTO power required hp (kW)80 (60)
Hydraulic circuits required2
Minimum relief pressure required psi (bar)1500 (103)
DrawbarASAE Category II
Swivel Hitch - DrawbarASAE Category II or III
Swivel Hitch - 2-PointASAE Category II, III-N, or III
Electrical7-pin electrical connector for transport lights
Tires
Tubeless ag rib implement tiresFlail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR
Transport Speed
Max road speed mph (kph)20 (32)
Dimensions*
Width, transport ft. in. (m)11’ 3” (3.42)
Width , operating ft. in. (m)16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped
Length, transport ft. in. (m)Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
Length, operating ft. in. (m)Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)***
Height ft. in. (m)Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35)
Ground clearance with head fully raised in. (mm)Flail Tine: 17 (4.32) or Roll: 18 (4.57)
Weights**
Operating weight lbs. (kg.)Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)***

— Not Available
*** Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
*** Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.
*** Weights & dimensions are with standard drawbar hitch. Add 150 lbs. (68 kg) & 2 ft. (.60) length for swivel hitch models.

social stream
Kongskilde:
Top Service:


New Holland Agriculture a brand of CNH Industrial ©
back to top