Windrower Headers

SUPERIOR DISC AND SICKLE HEADERS

Gallery

MODELS

Durabine™ 416

Cutting width ft. in. (m)16' 1" (4.9)
Number of discs10
Conditioning system102” chevron intermeshing rubber or steel rolls, or high-contact rolls


Standard  Optional 
Durabine™ 416
Header drive
Cutting width ft. in. (m)16' 1" (4.9)
Overall width ft. in. (m)16' 4" (4956)
Weighting with conditioning system lbs. (kg)4700 (2132)
Weight - rubber rolls lb. (kg)
Modular Disc Cutter Bar
Number of discs10
Maximum disc speed rpm2500
Number of reversible, swing-away knives20 (2 per disc)
Knife tip speed mph (kph)181 (291)
FlotationHydraulic adjustment from windrower cab
Cutting angle and heightStandard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 in (18 to 89 mm) with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)27 (686)*
Hood linerHigh density, impact-resistant polyethylene
Cutter Bar
Type
Knives
Guards
Angle range degrees
Skid shoes
Cutting height in. (mm)
Sickle Drive
Type
Speed spm
Stroke in. (mm)
Reel
Type
Adjustments
Speed
Mechanical drive rpm
Hydraulic drive (optional) rpm
Speed adjustment (mechanical)
Diameter in. (mm)
Drive
Tine bars
Bushings / bearings in. (mm)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm938
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop-bolt
Windrow/swath width in. (mm)38 to 96 (965 to 2438)
Conditioner
Types
Roll length (crush area) in. (mm)
Roll diameter in. (mm)
Roll drive
Speed rpm
Roll pressure
Roll gap
Windrow width in. (mm
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Floating range in. (mm)
Flighting depth in. (mm)7 (178)
Speed rpm

Durabine™ 419

Cutting width ft. in. (m)19' 4" (5.9)
Number of discs12
Conditioning system102” chevron intermeshing rubber or steel rolls, or high-contact rolls


Standard  Optional 
Durabine™ 419
Header drive
Cutting width ft. in. (m)19' 4" (5.9)
Overall width ft. in. (m)19' 5" (5912)
Weighting with conditioning system lbs. (kg)5340 (2422)
Weight - rubber rolls lb. (kg)
Modular Disc Cutter Bar
Number of discs12
Maximum disc speed rpm2500
Number of reversible, swing-away knives24 (2 per disc)
Knife tip speed mph (kph)181 (291)
FlotationHydraulic adjustment from windrower cab
Cutting angle and heightStandard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 in (18 to 89 mm) with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)29.6 (754)**
Hood linerHigh density, impact-resistant polyethylene
Cutter Bar
Type
Knives
Guards
Angle range degrees
Skid shoes
Cutting height in. (mm)
Sickle Drive
Type
Speed spm
Stroke in. (mm)
Reel
Type
Adjustments
Speed
Mechanical drive rpm
Hydraulic drive (optional) rpm
Speed adjustment (mechanical)
Diameter in. (mm)
Drive
Tine bars
Bushings / bearings in. (mm)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm938
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop-bolt
Windrow/swath width in. (mm)38 to 96 (965 to 2438)
Conditioner
Types
Roll length (crush area) in. (mm)
Roll diameter in. (mm)
Roll drive
Speed rpm
Roll pressure
Roll gap
Windrow width in. (mm
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Floating range in. (mm)
Flighting depth in. (mm)7 (178)
Speed rpm

Durabine™ 416 Specialty Grass Crop

Cutting width ft. in. (m)16' 1" (4.9)
Number of discs10
Conditioning systemNo conditioning module is included. Includes tapered auger flighting, flexible lean bar, a second cutterbar curtain, and windrow forming rods


Standard  Optional 
Durabine™ 416 Specialty Grass Crop
Header drive
Cutting width ft. in. (m)16' 1" (4.9)
Overall width ft. in. (m)16' 4" (4956)
Weighting with conditioning system lbs. (kg)4700 (2132)
Weight - rubber rolls lb. (kg)
Modular Disc Cutter Bar
Number of discs10
Maximum disc speed rpm2500
Number of reversible, swing-away knives20 (2 per disc)
Knife tip speed mph (kph)181 (291)
FlotationHydraulic adjustment from windrower cab
Cutting angle and heightStandard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 in (18 to 89 mm) with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)27 (686)*
Hood linerHigh density, impact-resistant polyethylene
Cutter Bar
Type
Knives
Guards
Angle range degrees
Skid shoes
Cutting height in. (mm)
Sickle Drive
Type
Speed spm
Stroke in. (mm)
Reel
Type
Adjustments
Speed
Mechanical drive rpm
Hydraulic drive (optional) rpm
Speed adjustment (mechanical)
Diameter in. (mm)
Drive
Tine bars
Bushings / bearings in. (mm)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm938
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop-bolt
Windrow/swath width in. (mm)38 to 96 (965 to 2438)
Conditioner
Types
Roll length (crush area) in. (mm)
Roll diameter in. (mm)
Roll drive
Speed rpm
Roll pressure
Roll gap
Windrow width in. (mm
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Floating range in. (mm)
Flighting depth in. (mm)7 (178)
Speed rpm

Haybine® 14HS

Cutting width ft. in. (m)14' 3" (4.34)
Number of discs
Conditioning system102” chevron intermeshing rubber or steel, or high-contact rolls


Standard  Optional 
Haybine® 14HS
Header drive
Cutting width ft. in. (m)14' 3" (4.34)
Overall width ft. in. (m)16' 3" (4.95)
Weighting with conditioning system lbs. (kg)
Weight - rubber rolls lb. (kg)3900 (1770)
Modular Disc Cutter Bar
Number of discs
Maximum disc speed rpm
Number of reversible, swing-away knives
Knife tip speed mph (kph)
Flotation
Cutting angle and height
Header ground clearance - bottom of skid shoes in. (mm)
Hood liner
Cutter Bar
TypeTimed, dual, counterstroking
KnivesOver serrated, bolted
Guards2-tine, double-hardened
Angle range degreesneg. 6 to neg. 12
Skid shoes4
Cutting height in. (mm)1.2-6.2 (30.5-157.5)
Sickle Drive
TypeOpen, dual, wobble
Speed spm1810
Stroke in. (mm)3 (76)
Reel
Type5-bat
AdjustmentsFore/aft & vertical
Speed
Mechanical drive rpm52-83
Hydraulic drive (optional) rpm0-76
Speed adjustment (mechanical)Variable sheave
Diameter in. (mm)42 (1067)
DriveBelt & chain
Tine barsSegmented
Bushings / bearings in. (mm)1.25 (31.75) bearing w/collar at cam end & bushings at all other locations
Conditioner (Rolls)
Type
Length in. (m)
Roll speed rpm
Roll pressure
Roll gap
Windrow/swath width in. (mm)
Conditioner
TypesChevron-design intermeshing rubber or steel; or high-contact chevron urethane
Roll length (crush area) in. (mm)102 (2591)
Roll diameter in. (mm)103.375 (263.5)
Roll driveSpur gearbox & PTOs
Speed rpm717
Roll pressureHand crank
Roll gapAdjustable stop-bolt
Windrow width in. (mm38-96 (910-2438)
Auger
TypeSingle, floating
Maximum diameter in. (mm)20 (508)
Floating range in. (mm)2 (50.8)
Flighting depth in. (mm)5 (178)
Speed rpm287

Haybine® 16HS

Cutting width ft. in. (m)16' 3" (4.95)
Number of discs
Conditioning system102” chevron intermeshing rubber or steel, or high-contact rolls


Standard  Optional 
Haybine® 16HS
Header drive
Cutting width ft. in. (m)16' 3" (4.95)
Overall width ft. in. (m)18' 3" (5.56)
Weighting with conditioning system lbs. (kg)
Weight - rubber rolls lb. (kg)4120 (1869)
Modular Disc Cutter Bar
Number of discs
Maximum disc speed rpm
Number of reversible, swing-away knives
Knife tip speed mph (kph)
Flotation
Cutting angle and height
Header ground clearance - bottom of skid shoes in. (mm)
Hood liner
Cutter Bar
TypeTimed, dual, counterstroking
KnivesOver serrated, bolted
Guards2-tine, double-hardened
Angle range degreesneg. 6 to neg. 12
Skid shoes4
Cutting height in. (mm)1.2-6.2 (30.5-157.5)
Sickle Drive
TypeOpen, dual, wobble
Speed spm1810
Stroke in. (mm)3 (76)
Reel
Type5-bat
AdjustmentsFore/aft & vertical
Speed
Mechanical drive rpm52-83
Hydraulic drive (optional) rpm0-76
Speed adjustment (mechanical)Variable sheave
Diameter in. (mm)42 (1067)
DriveBelt & chain
Tine barsSegmented
Bushings / bearings in. (mm)1.25 (31.75) bearing w/collar at cam end & bushings at all other locations
Conditioner (Rolls)
Type
Length in. (m)
Roll speed rpm
Roll pressure
Roll gap
Windrow/swath width in. (mm)
Conditioner
TypesChevron-design intermeshing rubber or steel; or high-contact chevron urethane
Roll length (crush area) in. (mm)102 (2591)
Roll diameter in. (mm)103.375 (263.5)
Roll driveSpur gearbox & PTOs
Speed rpm717
Roll pressureHand crank
Roll gapAdjustable stop-bolt
Windrow width in. (mm38-96 (910-2438)
Auger
TypeSingle, floating
Maximum diameter in. (mm)20 (508)
Floating range in. (mm)2 (50.8)
Flighting depth in. (mm)5 (178)
Speed rpm287

Haybine® 18HS

Cutting width ft. in. (m)18' 3" (5.56)
Number of discs
Conditioning system102” chevron intermeshing rubber or steel, or high-contact rolls


Standard  Optional 
Haybine® 18HS
Header drive
Cutting width ft. in. (m)18' 3" (5.56)
Overall width ft. in. (m)20' 3" (6.17)
Weighting with conditioning system lbs. (kg)
Weight - rubber rolls lb. (kg)4370 (1983)
Modular Disc Cutter Bar
Number of discs
Maximum disc speed rpm
Number of reversible, swing-away knives
Knife tip speed mph (kph)
Flotation
Cutting angle and height
Header ground clearance - bottom of skid shoes in. (mm)
Hood liner
Cutter Bar
TypeTimed, dual, counterstroking
KnivesOver serrated, bolted
Guards2-tine, double-hardened
Angle range degreesneg. 6 to neg. 12
Skid shoes4
Cutting height in. (mm)1.2-6.2 (30.5-157.5)
Sickle Drive
TypeOpen, dual, wobble
Speed spm1810
Stroke in. (mm)3 (76)
Reel
Type5-bat
AdjustmentsFore/aft & vertical
Speed
Mechanical drive rpm52-83
Hydraulic drive (optional) rpm0-76
Speed adjustment (mechanical)Variable sheave
Diameter in. (mm)42 (1067)
DriveBelt & chain
Tine barsSegmented
Bushings / bearings in. (mm)1.25 (31.75) bearing w/collar at cam end & bushings at all other locations
Conditioner (Rolls)
Type
Length in. (m)
Roll speed rpm
Roll pressure
Roll gap
Windrow/swath width in. (mm)
Conditioner
TypesChevron-design intermeshing rubber or steel; or high-contact chevron urethane
Roll length (crush area) in. (mm)102 (2591)
Roll diameter in. (mm)103.375 (263.5)
Roll driveSpur gearbox & PTOs
Speed rpm717
Roll pressureHand crank
Roll gapAdjustable stop-bolt
Windrow width in. (mm38-96 (910-2438)
Auger
TypeSingle, floating
Maximum diameter in. (mm)20 (508)
Floating range in. (mm)2 (50.8)
Flighting depth in. (mm)5 (178)
Speed rpm287
Top Service:


New Holland Agriculture a brand of CNH Industrial ©
back to top